9 fictional karts

[oppolo]

   point2 = 33,33, 24.7
   
   point4 = 58,33, 26.2

   point5 = 66,66, 26.8
   
   point8 = 93,33, 28

check "." and ","

[fdg1997]

haha don't belive!! Thanks man working fine!! can you say to me how i change the name o it to 21HP and to the CRG Body? Thanks a lot!!

[oppolo]

haha don't belive!! Thanks man working fine!! can you say to me how i change the name o it to 21HP and to the CRG Body? Thanks a lot!!

yes, all you need is here http://forum.kartracing-pro.com/index.php?topic=2602.0

[Sam]

When i download the new patch i get all the motor names but in the file theres only a ini file and a read me text and some only have a read me text how do i get the new rotary motor on there

[oppolo]

first post updated

[oppolo]

someone want a fictional mini with 4T 72cc 6.5 hp 4 gears? http://www.ooracing.com/store/index.php?act=viewProd&productId=4269

but the chassis has not stick gear and clutch lever

[DéDé]

I have an Aixro and the rpm limit is 11.200, because the rules said that in the english championship. They check your Mychron or Alfano after every run and if ones is higher then 11.200, your are disqualified from the race. So I think it would be better to make the rpm limit.
I used white (green in hot) vega, so I opened the soft tyres for Aixro. I think you would make it, too.
But I loved it! Lets work on the sound.

[oppolo]

I have an Aixro and the rpm limit is 11.200, because the rules said that in the english championship. They check your Mychron or Alfano after every run and if ones is higher then 11.200, your are disqualified from the race. So I think it would be better to make the rpm limit.
I used white (green in hot) vega, so I opened the soft tyres for Aixro. I think you would make it, too.
But I loved it! Lets work on the sound.

ok, now I see here http://www.woelfle-engineering.com/Produkte/Aixro%20XR50%20Karting%20Rotary%20Engine%20Operation%20Manual%20110825_edition%204.6.pdf

6.3.1.
Engine Speed
From 2008 all XR50 are equipped with a rev limiter. Still you should adjust the transmission ratio to keep the maximum engine speed below 11000 rpm

so, rpm limiter at 11.200 and tyres of KZ1 (soft medium wet) ?

for sounds and 3D models I'm not able

[DéDé]

I have an Aixro and the rpm limit is 11.200, because the rules said that in the english championship. They check your Mychron or Alfano after every run and if ones is higher then 11.200, your are disqualified from the race. So I think it would be better to make the rpm limit.
I used white (green in hot) vega, so I opened the soft tyres for Aixro. I think you would make it, too.
But I loved it! Lets work on the sound.

ok, now I see here http://www.woelfle-engineering.com/Produkte/Aixro%20XR50%20Karting%20Rotary%20Engine%20Operation%20Manual%20110825_edition%204.6.pdf

6.3.1.
Engine Speed
From 2008 all XR50 are equipped with a rev limiter. Still you should adjust the transmission ratio to keep the maximum engine speed below 11000 rpm

so, rpm limiter at 11.200 and tyres of KZ1 (soft medium wet) ?

for sounds and 3D models I'm not able

I have an "old" Aixro with normal apex seals and I can rev it to 10.700 but the manual said only 10.200. I don't try it, but I think there isn't a rev limiter, they just said because they don't want the users to over rev the engine. The 11.200 is OK for the Aixro with ceramic seal.

Yes, the KZ1 tyres are better! Thanks for help! I cannot stop driving at the night until 2 o'clock I loved it!

3D model isn't important as the sound. I gonna ask EVO, after I record my Aixro sounds.

[oppolo]

The 11.200 is OK for the Aixro with ceramic seal.

Yes, the KZ1 tyres are better! Thanks for help! I cannot stop driving at the night until 2 o'clock I loved it!

3D model isn't important as the sound. I gonna ask EVO, after I record my Aixro sounds.

good
do you know usually what  rear sprockets are used? front sprocket is fixed at 11

here also there is written 11500 and not 11200 https://sites.google.com/site/aixroentry/rules

[DéDé]

good
do you know usually what  rear sprockets are used? front sprocket is fixed at 11

here also there is written 11500 and not 11200 https://sites.google.com/site/aixroentry/rules

Yes, in the champs, fixed to 11 but you choose from 10-13. I am using 42-52 to at the rear. I don't know exactly, just a guess, with 11-43 at 10.700rpm it goes about 125km/h. I didn't calculated it, just think it from the speed difference between Aixro and Rotax Max.
These are the newest rules, I didn't read it this year. Last year was 11.200 rpm. Then make the rpm limit to 11.500.

[oppolo]

good
do you know usually what  rear sprockets are used? front sprocket is fixed at 11

here also there is written 11500 and not 11200 https://sites.google.com/site/aixroentry/rules

Yes, in the champs, fixed to 11 but you choose from 10-13. I am using 42-52 to at the rear. I don't know exactly, just a guess, with 11-43 at 10.700rpm it goes about 125km/h. I didn't calculated it, just think it from the speed difference between Aixro and Rotax Max.
These are the newest rules, I didn't read it this year. Last year was 11.200 rpm. Then make the rpm limit to 11.500.

first post updated

[DéDé]

What is your best times with the Aixro?

[bobthemac]

Just tried to download the karts want to have a play with the TKM but the download links have expired and go to no files. Can someone repost these karts.

[oppolo]

Just tried to download the karts want to have a play with the TKM but the download links have expired and go to no files. Can someone repost these karts.

they all don't work anymore with beta10