Engines / karts

[PiBoSo]

Starting with Beta8, physics files ( .cfg and .engn ) of the engines and karts ( .cfg ) are unencrypted.
It should now be possible to create new engines and new karts ( combining the different chassis / engines ).

[Nathan Dunnett]

This is awesome to hear, can't wait to start messing around with stuff that I shouldn't.

[nmpcs]

This is awesome to hear, can't wait to start messing around with stuff that I shouldn't.

hehehe. I hope you do a good job

[EVO]

Will it work in multiplayer?

[EVO]

Are sound unencrypted?

[PiBoSo]

Will it work in multiplayer?

It should work if you create a new kart, but not if you modify an existing one.

[jd88x89]

Will it work in multiplayer?

It should work if you create a new kart, but not if you modify an existing one.

So, if the other person also has the modified kart, would they still be able to race with u?

[PiBoSo]

Will it work in multiplayer?

It should work if you create a new kart, but not if you modify an existing one.

So, if the other person also has the modified kart, would they still be able to race with u?

It should be possible. Please report if there are problems.

[jd88x89]

Ok, will do

[jd88x89]

Okay, can u give me a base on how to change and edit an engine? And will it be possible eventually to model engines and put them in the game?
Thanks, jd88x89

[EVO]

you can model engines now you just have to scale and position them in the right place which may take awhile without a basic 3dmax scene template. I did it for the airboxes ill do it for a simple KT100.

[jd88x89]

you can model engines now you just have to scale and position them in the right place which may take awhile without a basic 3dmax scene template. I did it for the airboxes ill do it for a simple KT100.

That would be awesome. Thxs. So what ur saying is just follow ur airbox tutorial?

[EVO]

if we want to make sounds how long is each sample?  are they straight forward like their names?  kart_idle.wav  ,  kart_offhigh.wav kart_onhigh.wav

Arrowjmax4 can you record the sound next dyno runs you see and run the engine under high and low load (rev up and down fast as well as slow).  What pipe do you use on your engines in the dyno?

[PiBoSo]

if we want to make sounds how long is each sample?  are they straight forward like their names?  kart_idle.wav  ,  kart_offhigh.wav kart_onhigh.wav

Arrowjmax4 can you record the sound next dyno runs you see and run the engine under high and low load (rev up and down fast as well as slow).  What pipe do you use on your engines in the dyno?

Samples must be recorded at a fixed RPM, and saved as mono. They must be loopable.

[PiBoSo]

A quick reference to calculate the ballast weight:

- KF-A ( no front brakes ): 55 kg, including tyres and bodywork.
- KF-B ( front brakes ) and KZ ( combined brakes ): 60 kg, including tyres and bodywork.
- driver: 70 kg

Example: KF1.
Ballast weight = 160kg ( regulations ) - 70kg ( driver ) - 60kg ( chassis, bodywork, tyres ) - 15kg ( KF1 engine and radiator ) = 15kg.

For the position: X+ is right, Y+ is UP and Z+ is forward.