Author Topic: QUESTION: How to give a engine a Push start?  (Read 532 times)

Gillestheracer13

  • Jr. Member
  • **
  • Posts: 56
  • 2016 KZ1 Driver 2017 Porsche GT3 Cup Driver
    • View Profile
    • Email
QUESTION: How to give a engine a Push start?
« on: February 19, 2017, 04:17:59 PM »
Hi all.

I'm trying to create my first few engines mods for Kart Racing Pro which require a push start.

Can anybody help?

I'm working on a OK, OKJ, and a IAME 100cc Komet engine in case someone is wondering.

Thanks to anyone who can help me, and with everyone i really do mean everyone ;)
Race or Die.

LauZzZn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1973
  • German Champion 2013 X30J - Formula Renault 2.0
    • View Profile
Re: QUESTION: How to give a engine a Push start?
« Reply #1 on: February 19, 2017, 05:14:53 PM »
I dont have the actual answer for you, but I suggest comparing the F100 engine and a KF for example. Then you may find out which settings differ to make the engine require a push start


Custom Track work

Gillestheracer13

  • Jr. Member
  • **
  • Posts: 56
  • 2016 KZ1 Driver 2017 Porsche GT3 Cup Driver
    • View Profile
    • Email
Re: QUESTION: How to give a engine a Push start?
« Reply #2 on: February 19, 2017, 06:03:00 PM »
I dont have the actual answer for you, but I suggest comparing the F100 engine and a KF for example. Then you may find out which settings differ to make the engine require a push start

Already did, but no option in the files say something about push start or anything similair in that case.
Race or Die.

Cory_Hayes

  • Hero Member
  • *****
  • Posts: 791
    • View Profile
Re: QUESTION: How to give a engine a Push start?
« Reply #3 on: February 20, 2017, 12:33:08 AM »
The difference between the files is this

" clutch
   {
      maxTorque = 34         ; ~ 26 Nm * 1.3
      centrifugal = 1
      minRPM = 2400
      maxRPM = 3200
   } "

( engine example being the i_kf1 ) the file is named i_kf1.cfg that it is in, in order to make something direct drive, simply get rid of it, also get rid of
" starter
   {
      torque = 2.5
      maxRPM = 2100
   } "

From the same file its located a little further down.

( The F100 doesn't have that located anywhere )

Gillestheracer13

  • Jr. Member
  • **
  • Posts: 56
  • 2016 KZ1 Driver 2017 Porsche GT3 Cup Driver
    • View Profile
    • Email
Re: QUESTION: How to give a engine a Push start?
« Reply #4 on: February 20, 2017, 05:06:08 AM »
The difference between the files is this

" clutch
   {
      maxTorque = 34         ; ~ 26 Nm * 1.3
      centrifugal = 1
      minRPM = 2400
      maxRPM = 3200
   } "

( engine example being the i_kf1 ) the file is named i_kf1.cfg that it is in, in order to make something direct drive, simply get rid of it, also get rid of
" starter
   {
      torque = 2.5
      maxRPM = 2100
   } "

From the same file its located a little further down.

( The F100 doesn't have that located anywhere )

I Tried and for some reason it is not working.
Race or Die.

Cory_Hayes

  • Hero Member
  • *****
  • Posts: 791
    • View Profile
Re: QUESTION: How to give a engine a Push start?
« Reply #5 on: February 20, 2017, 06:16:41 AM »
....Did you save it....? and rename it properly? and is it still a .cfg or did it turn into a .txt

Gillestheracer13

  • Jr. Member
  • **
  • Posts: 56
  • 2016 KZ1 Driver 2017 Porsche GT3 Cup Driver
    • View Profile
    • Email
Re: QUESTION: How to give a engine a Push start?
« Reply #6 on: February 20, 2017, 05:31:21 PM »
....Did you save it....? and rename it properly? and is it still a .cfg or did it turn into a .txt
i think so.
Race or Die.

AidenKempf

  • Jr. Member
  • **
  • Posts: 80
  • "A Clean Go-Kart is a fast one" Doug Fleming
    • View Profile
Re: QUESTION: How to give a engine a Push start?
« Reply #7 on: February 20, 2017, 05:37:06 PM »
Hi all.

I'm working on a OK, OKJ, and a IAME 100cc Komet engine in case someone is wondering.


Wait you are? If you figure out how to, do you have the 3dmax?
Your just tearing shit up if you don't test

Gillestheracer13

  • Jr. Member
  • **
  • Posts: 56
  • 2016 KZ1 Driver 2017 Porsche GT3 Cup Driver
    • View Profile
    • Email
Re: QUESTION: How to give a engine a Push start?
« Reply #8 on: February 20, 2017, 10:08:44 PM »
Hi all.

I'm working on a OK, OKJ, and a IAME 100cc Komet engine in case someone is wondering.


Wait you are? If you figure out how to, do you have the 3dmax?

engine models are already done, only need a push start and some work on the tyres
Race or Die.

AidenKempf

  • Jr. Member
  • **
  • Posts: 80
  • "A Clean Go-Kart is a fast one" Doug Fleming
    • View Profile
Re: QUESTION: How to give a engine a Push start?
« Reply #9 on: March 09, 2017, 01:53:06 AM »
K thanks for the info any updates?
Your just tearing shit up if you don't test

Gillestheracer13

  • Jr. Member
  • **
  • Posts: 56
  • 2016 KZ1 Driver 2017 Porsche GT3 Cup Driver
    • View Profile
    • Email
Re: QUESTION: How to give a engine a Push start?
« Reply #10 on: March 10, 2017, 09:02:18 AM »
K thanks for the info any updates?

The Engines are done, but i don't like releasing something which doesnt have one important thing missing, Which is a push start
Race or Die.

Raise

  • Jr. Member
  • **
  • Posts: 90
    • View Profile
Re: QUESTION: How to give a engine a Push start?
« Reply #11 on: March 10, 2017, 09:16:30 AM »
K thanks for the info any updates?

The Engines are done, but i don't like releasing something which doesnt have one important thing missing, Which is a push start

PM the engine files to me I did it once I'll do my best to do it again and slap my engine model on there also

Gillestheracer13

  • Jr. Member
  • **
  • Posts: 56
  • 2016 KZ1 Driver 2017 Porsche GT3 Cup Driver
    • View Profile
    • Email
Re: QUESTION: How to give a engine a Push start?
« Reply #12 on: March 10, 2017, 09:42:00 AM »
K thanks for the info any updates?

The Engines are done, but i don't like releasing something which doesnt have one important thing missing, Which is a push start

PM the engine files to me I did it once I'll do my best to do it again and slap my engine model on there also

Thanks, i will send the file some time tonight, dont have acces to my KRP files right now ;)
Race or Die.

AidenKempf

  • Jr. Member
  • **
  • Posts: 80
  • "A Clean Go-Kart is a fast one" Doug Fleming
    • View Profile
Re: QUESTION: How to give a engine a Push start?
« Reply #13 on: March 10, 2017, 07:43:43 PM »
K, so will they be for the public once they are done?
Your just tearing shit up if you don't test