PF International

[CRGDK37]

OMG YES!

[asehauDLM]

I modified the .ini file a bit, maybe you want to add it to your release.

[oppolo]

i dont' know if you want feedback for improve the track or you consider it as final, anyway that tarmac hurt my eyes, sorry

[maxrod]

Will make some changes but would be good to get more feed back, CRGDK37 the length must be longer then 1070 as it is layed onto google map and in tracked it came to 1300 it may be the new section as it is guessed, But will make changes to it, Good to see feed back thank's.

[asehauDLM]

Oh, I think it's the length of the old layout, sorry.

[KosmicJunior40]

The corner at 0.18 seconds of this video is now banked. Only slightly but it would make it more real ahah
http://www.youtube.com/watch?v=TX1ScL-2saI&feature=youtu.be

[maxrod]

The corner at 0.18 and the corner before was both rebuilt after the video as i was not happy with it.

[Jommy45]

hi maxrod, just tried out pf, great effort, just a few little things that could make it better, the downhill section after the bridge is too steep and short, it would be better and more realistic if it was smoother and more stretched out, kosmicjunior40 is also right about the banking, maybe make the underneath section of the bridge slightly lower and the cross over the top slightly wider, still an amazing effort heres a onboard vid if it helps http://www.youtube.com/watch?v=qtj9-z7URtk

[maxrod]

As i stated in the start of the project the new section will be guessed, The bumps are where the track is joined, Will look at this part again but it is alot of work to re-work as it is the area around that will need to be re-worked as well, I like the video and it will help if i re-work this section as it gives good information, Thanks.

[Schwoni]

the track is fine very fun to drive and very much courage curves. But i have only 50 FPS (without 3d Gras) With 3d Gras 10 FPS less
Have u done all that objects collidable? If yes use invisible walls for that and make the 3d objects non collidable. That improved the FPS for me in Bueren.

http://www.youtube.com/watch?v=zOGB2LY7QU0&feature=youtu.be

[patrese]

Been round PFI with a GPS, logging all the data you would need i guess.
I can try and post it if it helps, you would need to download Race Studio 2 from Aim Motorsports who make the Mychron.
http://www.aimsports.com/products/race-studio/downloads.html

[maxrod]

Post it to me, I can have a look as this would be the best time as i am making some change's to the cross over section, All information will be good.

[CRGDK37]

i dont know if your aware of this but there is only 1 tramline/corridor and its in the middle of the main straight? just a bug found while racing

[maxrod]

Will be looked at, Please if you find any other problems post as i will only be making these changes then i will release again and then onto other projects, I have re-built the cross over the bridge has been move back a little and down a little, removed bumps on down hill, will have less solid objects to have better fps but will be hard to help all as i don't have a problem with fps as i am getting over 200 so i can only go by my own spec.

[patrese]

In Race Studio it is shown as a drk file, but if i try to find it in the data folder it seems to be several seperate files.
I have gathered them and zipped them up, but it's 1.4mb and won't post here. Pm me a email addy and i'll post it directly to you. Try to unzip them and paste them  into Race Studio2 Data folder.
Not sure if this works. I'll try to get some more info from my mate about this whole lark as I'm a bit crap when it's not straight forward.