Messages

Thats great,
Thanks for the help

Les

Thanks very much,

Next problem!! -
The front wheel track is set very wide, so I was having a play with the settings, I have very little thread projecting after the nut is on. If I tighten the nut any tighter, the wheel tightens up, is that all normal?

To reduce the front track, I take it I remove spacers from the axle, do I then put them on the outside of the wheel before replacing the nut?

Thanks in advance
Les

Hi all,
Im new to real karting,havi g done much indoor stuff,I finally gave in and bought my son a honda cadet.

Its second hand but seems in pretty good order, couple of things I need help with!

When turning the steering wheel all the way to the limits of movement in each direction, one wheel will start to turn back just before the limit.(which wheel is dependent on which way you turn).
Im guessing it needs a stop of some sort to limit the movement?
Or possibly the geometry is wrong?

Second issue is the noise! Its a lot louder than the similar engined hire karts,  no problem in itself but would that cause an issue at the track?

We will probably spend a fair bit of time practicing for fun  before racing it...

Thanks in advance
Les