Profile.ini

[PiBoSo]

There are a few settings that are only available manually editing profile.ini file that is located in profile directory under "profiles" in "My Documents"\PiBoSo\Kart Racing Pro\ save path.

Code Select Expand


map_shadow_disable = 1

under "gfx" section to disable track shadows.

[PiBoSo]

Code Select Expand


[testing]
groove_multiplier = 1
wet_multiplier = 1


1 is the default value. Increase it ( up to 20 ) to have the tires generate groove and dry the track faster. Please note that this affects tires only: the global track surface will still dry at the same ( slow ) rate.
Testing session only.

Code Select Expand


[testing]
deformation_multiplier = 1


1 is the default value. Increase it ( up to 20 ) to have the tires deform the terrain faster.
Testing session only.

[PiBoSo]

Code Select Expand


[view]
shiftmul_lat = 1
shiftmul_vert = 1
shiftmul_long = 1
pitchmul = 1


Decrease the values to reduce the effect of g-forces on the cockpit view.

[PiBoSo]

Code Select Expand


[input]
steeringwheelleds = 1
steeringwheelleds_range = 1200


To enable Logitech G27 leds.

[PiBoSo]

Code Select Expand


[aids]
autobrake = 0


To disable the automatic brake ( proportional to track slope ) that is applied during the sighting lap and race starting procedure.

[PiBoSo]

Code Select Expand

[sound]
remotekarts_volume = 0.75

To set the sound volume of the remote karts.

[PiBoSo]

Code Select Expand

[export]
auto = 1

To automatically save the results to a CSV file ( in the "Documents"/PiBoSo/Kart Racing Pro/exports/ directory ) at the end of each session.

[PiBoSo]

Code Select Expand

[ext_view]
corner_anticipation=1

To enable the "Corner Anticipation" settings for the external view as well.
By default they are disabled.

[PiBoSo]

Code Select Expand

[ext_view]
free_look=0

To disable the "Free Look" settings for the external view.
By default they are enabled.

[PiBoSo]

Code Select Expand

screens_disable=1

under the "gfx" section to disable the live screens along the tracks.