Config issue - Wheels and pedals don't work at the same time

[PiBoSo]

i have v2 fanatec wheel v2 pedals and thrustmaster shifter and wheel kinda works really sensitive in calibration but pedals not working get pedals working then wheel wont then it only turns left  and pedals wont work keep going into calibration but each trime i do it uncalibrates or unassigns the previous thing i just did think that this is the game will not support multiple usb ports yet please confirm or not really love my racing and its really frustrating this is only game my rig has issues with
cheers

Kart Racing Pro supports multiple controllers.
The wheel and pedals must be both calibrated at the same time.
Every time the "Calibration" button is pressed, the calibration is reset for all controllers.

[7Drive]

Hi guys! I'm new here and I've found this forum because had the same problem with my Fanatec ClubSport Wheel Base V2 and ClubSport Pedals V3.

Here is my solution:
1.Settings --> Calibration
2.Chose what you want to calibrate (see attached picture)
3.Calibrate Wheel and Pedals
4.Click OK button
5.Assign controls in Settings menu

In my case after these steps problem was solved.

[Bloodycut]

It was very hard to calibrate T500RS and Derek Speare Designs pedals. I managed at least after several attempts. Every time I try to calibrate pedals after wheel something strange happened to wheel. It went crazy or all controls disappeared. Then I calibrated pedals first and after that the wheel. DXTweak was done before this for pedals.

[PiBoSo]

Could you please upload the file "calib.txt" that should be generated in "Documents"/PiBoSo/Kart Racing Pro/profiles/"your profile name"/ ?

[Bloodycut]

Here is my calib.txt

3
{
FA9B2810-B44B-11E9-800F-444553540000
Thrustmaster T500 RS Racing wheel
4
0
33188
0
65535
1
1023
511
1023
5
1023
511
1023
6
1023
511
1023
}
{
F20009F0-B446-11E9-8007-444553540000
T500 RS Gear Shift
2
0
128
128
128
1
128
128
128
}
{
F2027AF0-B446-11E9-8009-444553540000
DSD Professional Grade Sim Racing Pedals
6
0
0
0
0
1
0
0
0
2
0
0
0
3
2519
2519
3689
4
2636
2635
3659
5
29
12
4054
}

[Bloodycut]

Is it possible to encode manual h-shifter for kz1?

[PiBoSo]

Here is my calib.txt

Thank you.

[PiBoSo]

Is it possible to encode manual h-shifter for kz1?

At the moment it's not possible, because the real gearbox is sequential.

[Bloodycut]

Sequential is not suitable for me. Maybe modders invent h-shifter mod or not. Automatic works sometimes but I like to change right gear in right place.