new track error pitlane full

[matkart]

Follow this guide http://forum.kartracing-pro.com/index.php?topic=1832.0 i did a test track, but when i try to start the track
i get the error "pitlane full". What's wrong?
Sorry for the translation, i'm Italian

[LauZzZn]

work on the racedata files

[matkart]

this is the test track....
I did not understand what I do in race data, I have only done centerline

[LauZzZn]

thats the problem just do the racedata and save it

[matkart]

This is the file that generated, but it is always the same error... how should I add the references?

Code Select Expand


finish_line
{
long = 1220.053467
left = 1.000000
right = 2.000000
}
speedtrap_line
{
long = 0.000000
left = 0.000000
right = 0.000000
}
split1
{
long = 408.017822
left = -10.000000
right = 10.000000
}
split2
{
long = 816.035645
left = -10.000000
right = 10.000000
}
pit_lane
{
numstalls = 1
starttype = 1
startstartlong = 0.000000
startdifflong = 0.000000
startstartlat = 0.000000
startendlat = 0.000000
startanglerel = 0.000000
startposx = 55.000000
startposz = -124.000000
startspacingx = 8.000000
startspacingz = 8.000000
startangleabs = 0.000000
startcolumns = 0
start_stall0
{
long = 0.000000
lat = 0.000000
angle = 36.127693
}
}
starting_grid
{
numstalls = 6
numstallsperrow = 2
distfromstartline = 1.000000
lanespacing = 1.000000
rowspacing = 4.000000
difflat = 0.000000
lanewidth = 3.000000
latshift = 0.000000
side = 0
stall0
{
long = 1219.053467
lat = -1.500000
angle = 0.000000
}
stall1
{
long = 1218.053467
lat = 1.500000
angle = 0.000000
}
stall2
{
long = 1215.053467
lat = -1.500000
angle = 0.000000
}
stall3
{
long = 1214.053467
lat = 1.500000
angle = 0.000000
}
stall4
{
long = 1211.053467
lat = -1.500000
angle = 0.000000
}
stall5
{
long = 1210.053467
lat = 1.500000
angle = 0.000000
}
}
corridor0 = 0.000000
corridor1 = 0.000000
num_checkpoints = 0



[LauZzZn]

speedtrap line is the place where you want the speed measured.
also you have to set the pits and the grid

[matkart]

if I put the values ​​in speedtrap line i see the lines that move, but in absolute nothing happens, i also set the grid
saved and copied the files pista.map, pista.trp and pista.rdf folder inside tracks.pkz but does not work maybe because I've got another lane

[LauZzZn]

Generate grid by using the kart button and set more than one pit

[matkart]

I set 4 in num pits but in absolute nothing ever happens, i always say pitlane full

[matkart]

I finally managed to turn the kart on the track, but I did not mark the lap time even though I set it all in, and if I leave the track I end up in a vacuum, even if there is grass

[Birel-Rotax 42]

Did you assign the gras the TRKGRAS prefix? If not, that's why.

[matkart]

I did it this way TRKGRAS_object01, TRKGRAS_object02 ecc. And because I do not mark the lap time? Where am i wrong?

[Birel-Rotax 42]

For start/finish, is the "left" marked with a negative or positive number. Left is always negative, right is positive, and you have to add in splits and checkpoings with the same rule.

[matkart]

So i did well? (see picture above)

[Birel-Rotax 42]

You did not select Kart Racing Pro in that selection menu. You were on GP Bikes