ICA Maxter 100cc [Beta 2]

[Lo_Bianco_98]

...it does work?

no by my don´t work it

What is the problem?

when i change the engin to ica than come black screen

[Sam Flintham]

...it does work?

no by my don´t work it

What is the problem?

when i change the engin to ica than come black screen

When i release the new update tomorrow, overwrite all of the files and see if that helps 

[Sam Flintham]

BETA 2 RELEASED! 

[oppolo]

what are the differences with a F100?

[Sam Flintham]

what are the differences with a F100?

Torque curve and rev range is a bit different

[oppolo]

the engine seizes at 18000 rpm carb 2 and wheater 20 degress, is it wanted?

the engine heating should be adjusted, I can't keep the opt temp even with radiator cover at 60

[oliver]

the engine goes to the damage on a long straight

[oppolo]

the engine goes to the damage on a long straight

this happens also in F100 if we have a wrong carb and don't use choke for cooling the engine. but I was asking if it is normal in a ICA 100 to seize at 18000 and carb 2, it's not a problem of heating. or due to the fact the engine is always too cool, maybe Piboso has modeled the damage also for to much cooled engines?

[Sam Flintham]

the engine goes to the damage on a long straight

this happens also in F100 if we have a wrong carb and don't use choke for cooling the engine. but I was asking if it is normal in a ICA 100 to seize at 18000 and carb 2, it's not a problem of heating. or due to the fact the engine is always too cool, maybe Piboso has modeled the damage also for to much cooled engines?

I will try update the engine temperature physics soon to try and fix this

[oppolo]

with carb 4 and weather 20 degrees the engine reaches 19500 RPM without problems, the RPM indicator should be increase at 20000?

[Sam Flintham]

with carb 4 and weather 20 degrees the engine reaches 19500 RPM without problems, the RPM indicator should be increase at 20000?

Ica engines ususally rev up to 19.500 , I tested it with carb 4

[GhostriderPl]

In real Life a IC-A Engine goes to 19700rpm and you don't use choke because you damage the Reed Valves.

Choke is only used in FormulaA and SuperA.

I like the Mod, but the Sound is to "low" in my opinion. This engine should "scream" at 19000+rpm.

And the Power underneath 10000rpm is very low and kicks in then with full Power in real (more extreme in FormulaA +SuperA).

I hope that you aren't angry on me, but I post what I feel, because I drive in IC-A, FormulaA, SuperA  and FormulaC in the 90's 


Keep on mate. I think every Information is helpful.


Greetings, GhostriderPL

[oppolo]

so it should be disable the choke and the engine should run at 19700 without damage

what engine torque curve have you used? is there a link?

[Sam Flintham]

In real Life a IC-A Engine goes to 19700rpm and you don't use choke because you damage the Reed Valves.

Choke is only used in FormulaA and SuperA.

I like the Mod, but the Sound is to "low" in my opinion. This engine should "scream" at 19000+rpm.

And the Power underneath 10000rpm is very low and kicks in then with full Power in real (more extreme in FormulaA +SuperA).

I hope that you aren't angry on me, but I post what I feel, because I drive in IC-A, FormulaA, SuperA  and FormulaC in the 90's 


Keep on mate. I think every Information is helpful.


Greetings, GhostriderPL

Thanks for the input it really helps towards the mod, with the sounds I am always working on them
To give the engine that scream, and it is currently using f100 torque curve. Birel-Rotax 42 is currently making the ica torque curve, should be updated within 2-3 days with a more authentic feel 

[GhostriderPl]

so it should be disable the choke and the engine should run at 19700 without damage

what engine torque curve have you used? is there a link?

Some guys used the choke. But they don't know that it damages the Reed Valves. And we use different Reed Valves. You have thin ones and thick ones. (0.15mm up to 1mm). And it makes a big difference.

@Mod Makers  : We used different distance piece (right word?) between the Outlet and the Pipe (more Power from lower rpm's to more Power at Higher rpm's).

Such a little Powerful engine, but so many things to Setup it right. 


Greetings, GhostriderPL