Engines / karts

[oppolo]

with what program can be read physic file for to have the torque curve?

[PiBoSo]

with what program can be read physic file for to have the torque curve?

the .engn is a text file.
There is a visual tool to edit it, but it's not ready for release yet.

[Racehard]

Intake is on the sidde of the engine

It's in front. Does it fit?

[EVO]

Racehard these are rotary valve

http://www.rctech.net/forum/attachments/offroad-nitro-engine-forum/691149d1294692634-grossi-liquid-cooled-engines-3n.jpg

[Nathan Dunnett]

Is there any plan to make tyre and chassis characteristics editable?

[MRO]

Hi PiBoSo,
I'm working on Rotax Max and DD2 engines.
But nonsense if you don't release a chassis without front brakes,
or release the chassis editable.
To do a well done engine takes time and efforts: don't ask to remake chassis too for the moment,
saw that you already have well done edf.
So please proceed to release more versions:
having the 3d it's very easy for you to detach or small change details.

[Nathan Dunnett]

F100 has no front brakes if I'm not mistaken.

[James Beer]

or you could use the kf3 chassis

[EVO]

or you could use the kf3 chassis

F100 has no front brakes if I'm not mistaken.

Yes true. F100 would be more suitable. You would still need to change weight

[PiBoSo]

or you could use the kf3 chassis

F100 has no front brakes if I'm not mistaken.

Yes true. F100 would be more suitable. You would still need to change weight

KF3 and F100 share the same chassis.

[EVO]

What i mean is use that chassis but change weight for heavier rotax

[Nathan Dunnett]

You can set the ballast in the kart's .cfg file. For example, the Tony Kart KF1 is running 15 kg ballast to make weight.

[MRO]

okay, but you think of the chassis for rotax max and I think to the rotax max

[EVO]

if we want to make sounds how long is each sample?  are they straight forward like their names?  kart_idle.wav  ,  kart_offhigh.wav kart_onhigh.wav

Arrowjmax4 can you record the sound next dyno runs you see and run the engine under high and low load (rev up and down fast as well as slow).  What pipe do you use on your engines in the dyno?

Samples must be recorded at a fixed RPM, and saved as mono. They must be loopable.

PiBoSo i tried this today and the catergory would only load with your files and not the ones i created.  They are all 16bit wave mono files do they need your special encryption to work?

[PiBoSo]

if we want to make sounds how long is each sample?  are they straight forward like their names?  kart_idle.wav  ,  kart_offhigh.wav kart_onhigh.wav

Arrowjmax4 can you record the sound next dyno runs you see and run the engine under high and low load (rev up and down fast as well as slow).  What pipe do you use on your engines in the dyno?

Samples must be recorded at a fixed RPM, and saved as mono. They must be loopable.

PiBoSo i tried this today and the catergory would only load with your files and not the ones i created.  They are all 16bit wave mono files do they need your special encryption to work?

All WAV files should work.
Could you please upload the files?