Kart Racing Pro beta8

[oppolo]

I'm going on not to find a good FFB
in the profiler of G25 120 0 0 0 900, n the game 900 150 power
I drove only rented kart and there was a lot of vibrations during turning, here there are any, do you fell the same? what you think about?
maybe would it be good to put some fake vibrations during turns? other sims do for sure

[Schwoni]

what about tire pressure? with shifter 0.4 bar or 1 bar it`s the same problem.. 3 laps and 120 degrees so undrivable.

[Arrowjmax4]

PiBoSo has the engine mappings being corrected for f100 so the birel doesnt have the extra revs?

[PiBoSo]

PiBoSo has the engine mappings being corrected for f100 so the birel doesnt have the extra revs?

All 3 F100 engines are the same in beta8.

[Matthew McLean]

Ever since Beta 7 I've been loving the curbs, but I find it hard to hit them without flipping in this beta, has anyone else found it like that? Love the steering though, when set up correctly it feels a lot like a real kart.

[McBidouille]

Hi everybody,

It seems that there's a lot of things to say about B8 with this topic.
A really good improvement concerning the physics to my mind.
Karts are so much forgivable and braking is no more a problem (for me).
So we can push the kart further on the track while being able to make mistakes. We have now a good compromise between these facts. In any case, too many risks took have always brought a driver off the track.
Of course, the feelings will never be perfect, and things could always be better.
Two negative point I can give that are not bad but that can be better :
1- Balance on the chassis that could give us more stability entering and leaving the curves. (Mass transfer?)
2- More controllable slides under braking.(Probably linked with the mass transfer).

[Matthew McLean]

Also, a dry line still forms in the wet. I'm currently in a server with a friend and the weather settings are 19*, rainy, 100% wet and we've got oddly shaped dry patches.

[McBidouille]

I report though an error.
I just drove at essay on a F100 and in straights, reaching the maximum rpm value at full speed result in an engine overheat at each time
Is it normal?
I tested it with  the radiator cover at 35% but this has never change anything.

[DjFIL]

I've noticed (for the first time) that I've had to make gear setup changes so I don't keep hitting the RPM limiter (on multiple tracks).  Haven't noticed an overheat issue yet, maybe I never run long enough stints.

[kill_em_all]

Hello,

I receive a "failed to login" message when trying to enter the World servers. Is there a  problem? Locally the Beta 8 seems to be unlocked though.

Thanks

[Pentti Hilkuri]

Hello,

I receive a "failed to login" message when trying to enter the World servers. Is there a  problem? Locally the Beta 8 seems to be unlocked though.

Thanks

Have you registered your account?

[kill_em_all]

Thanks a lot Pentti, I missed that.

[PiBoSo]

what about tire pressure? with shifter 0.4 bar or 1 bar it`s the same problem.. 3 laps and 120 degrees so undrivable.

The problem is that the KZ1 stresses the rear tyres much more than the other karts. It weights more, too.
In real life, are there dedicated tyres for the shifters?

[LauZzZn]

no you have the same as in kf1 and kf3

[Aritz]

In fact they use softer tyres usually, they must be faster than kf1