CRG Mini photos

[Franco_06 ARG]

definitely the engine to be used is the engine parilla Iame Swift  60 http://www.google.com.ar/imgres?q=parilla+iame+promocional+2012+kart+argetino&um=1&hl=es&tbo=d&biw=1152&bih=763&tbm=isch&tbnid=AqxRPowOh4xZEM:&imgrefurl=http://curva1kart.com.ar/noticias/%3Fp%3D19783&docid=dWMX2Q7XHE1xIM&imgurl=http://curva1kart.com.ar/noticias/wp-content/uploads/2012/07/motor-parilla-mini-swift-promotional.jpg&w=180&h=205&ei=sND9ULuGHoby9gSYpYD4AQ&zoom=1&iact=hc&vpx=216&vpy=92&dur=602&hovh=163&hovw=143&tx=82&ty=108&sig=104973758353352305359&page=1&tbnh=138&tbnw=116&start=0&ndsp=22&ved=1t:429,r:1,s:0,i:80  http://www.google.com.ar/imgres?q=parilla+iame+promocional+2012+kart+argetino&um=1&hl=es&tbo=d&biw=1152&bih=763&tbm=isch&tbnid=xFvqEPq-L0D6tM:&imgrefurl=http://curva1kart.com.ar/noticias/%3Fcat%3D5&docid=CBNGIyPvjfzhIM&imgurl=http://curva1kart.com.ar/noticias/wp-content/uploads/2012/11/P17f40917-400x225.jpg&w=400&h=225&ei=sND9ULuGHoby9gSYpYD4AQ&zoom=1&iact=hc&vpx=819&vpy=190&dur=584&hovh=149&hovw=257&tx=110&ty=90&sig=104973758353352305359&page=1&tbnh=138&tbnw=231&start=0&ndsp=22&ved=1t:429,r:5,s:0,i:92

[jd88x89]

chassis settings are the same. but here in germany you werent able to change the front spocket, only the one at the axle.

It would be extremely useful to know the number of tooth of the front sprocket and the available set of rear sprockets.

Here in the US, with the Comer K-80, everyone has to run a ten tooth in the front, but the rear is free. You can run anywhere from a 70 to an 90 in the rear, depending on the track

[Andreas.L]

In Sweden (mini 60) you can chaench everything

[Eslotes]

Like the F100 Piboso Sprokets front ( 10-11-12 ) rear (from 63 to 92)

[Sam]

My dad and mum own a kart shop and we have 64 to 98
For rear sprockets then for fronts we do 8-14

[Eslotes]

thats imposible riding with 98 -.- and from already 92,a bumpy track already you brake the chain and bye race or qualy...

[Franco_06 ARG]

parilla IAME Swift 60!!!!http://i.ebayimg.com/00/s/MTIwMFgxNjAw/$T2eC16N,!)!E9s2f!pt!BQmm8jnr2w~~60_35.JPG           is this used in argentina

[Diddy4957]

thats imposible riding with 98 -.- and from already 92,a bumpy track already you brake the chain and bye race or qualy...

its not ive run a 97 before and it didnt come off, you just had to avoid the kerbs more

[jd88x89]

chassis settings are the same. but here in germany you werent able to change the front spocket, only the one at the axle.

It would be extremely useful to know the number of tooth of the front sprocket and the available set of rear sprockets.

Here in the US, with the Comer K-80, everyone has to run a ten tooth in the front, but the rear is free. You can run anywhere from a 70 to an 90 in the rear, depending on the track

Correction, the front sprocket is a 12 tooth.

[PiBoSo]

How fast can a mini 60cc go? At the moment the top speed is around 95km/h with 12/80. Is it too much?

[LauZzZn]

no thats the right speed i was never faster than 95 i think

[fdg1997]

Piboso can you post a video of the Mini?

[PiBoSo]

Piboso can you post a video of the Mini?

Not yet, sorry.
It's not ready for a video yet.

[LauZzZn]

picture?

[LIAM-36-AUS]

picture?

be patient guys!