• Welcome, Guest. Please login.
 
April 26, 2026, 06:59:50 PM

News:

Kart Racing Pro release13e available! :)


Kart Racing Pro beta5

Started by PiBoSo, January 05, 2012, 02:54:48 PM

Previous topic - Next topic

Aritz

January 06, 2012, 04:13:38 PM #45 Last Edit: January 06, 2012, 04:21:17 PM by Aritz
with shift help activated, downshifting is slow. I have the same problem because I still can´t shift without the help  :(

JonnyH

nevermind, got it now! yeehaw

kramarsk

Quote from: Aritz on January 06, 2012, 04:13:38 PM
with shift help activated, downshifting is slow. I have the same problem because I still can´t shift without the help  :(
I don`t use shifting help. In beta 5 it is much easy to upshift, but downshift is a pain. I always one or two times by lap, when trying to accelerate at the exit of the corner, do it from higher gear.

Nitrox

Would it be possible to fix the problem, that you can't enter a server with a different kart without server restart? This is really annoying..

PiBoSo

January 06, 2012, 05:52:41 PM #49 Last Edit: January 06, 2012, 05:55:15 PM by PiBoSo
Quote from: Nitrox on January 06, 2012, 05:46:26 PM
Would it be possible to fix the problem, that you can't enter a server with a different kart without server restart? This is really annoying..

Please add this request to the suggestions board: http://forum.kartracing-pro.com/index.php?board=3.0

Eslotes

Quote from: Eslotes on January 06, 2012, 12:36:44 PM
PiBoSo cant connect to the servers.
On aritz server wating it says Connected after few minuts its Data mismatch
Solution?
Now on the bierbudden also
PiBoSo help.
A smooth race never made a skillful racer.

Aritz

Quote from: PiBoSo on January 06, 2012, 11:33:17 AM
Quote from: Aritz on January 06, 2012, 11:20:18 AM
I am editing the default set to avoid the oversteering. Now the seat has to be moved to negative values to improve the handle. With that and a little bit less caster, the kart has a good handle after 3 laps :)

I need more laps yet.

"Negative values" = back? Probably the front tyres have too much grip. And to give more feeling to the kart probably tyres need to be more "forgiving" past the optimum slip angle.

I can't understand your english, sorry... Can you explain it more clear for me? Thanks :)

Schwoni

i noticed that we have 2 mins to drive laps before starting the race. i have done and get DSQ because jump start^^ but i have had 30 sec left to get to grid :)

dibu

Here one more positive feedback about online races in beta5.  :)
If all players show a ping <70ms in the chat box, the gameplay is really good now and the lags are acceptable low. We had such a session today and Schwoni already reported the same yesterday.

Schwoni

yes this is very good. yesterday we was 6- 8 people all from germany on bierbuden server so all have had a ping of 30 that was almost perfect. :)
But what really sucks i tested again now. this fps drop at amsterdam in and roskilde. i tested also with 800x600 all low no antialies and so things. and it still lag massive with 2 gig graphic card -.-
that`s shit and it is really weird because it is only  sinvce beta 4 or 3 :(

antonino

ragazzi aiuto non riesco a verniciare il kart come devo fare?? :) :)

CaseyGraves

When driving the shifter, if you rev the engine up to max revs with the clutch in it will shut the motor off immediately and wont allow you to restart

Racehard

Because the engine is broken ;)

PiBoSo

Quote from: CaseyGraves on January 07, 2012, 12:32:47 AM
When driving the shifter, if you rev the engine up to max revs with the clutch in it will shut the motor off immediately and wont allow you to restart

There is no more an rpm limiter on shifter karts.

Rupe W

hello, weve had mixed results over at RD,  its alot beter but still to many problems... have any of you tried to connect up through tunggle Lan.. I have it set up and can see it , just wondering if its more stable... i use it for Grid and it works really smooth...

But the sim is getting alot better.. high ping is the killer..  but when it works its spot on... :-)