4 Stroke Engine

[EVO]

thats a Biland?
Someone that has the engine can post photos from each angle and overall dimensions should be enough.
detail photos too

[laraarsa]

http://www.kartweb.com/TechArt/New_Product_2002/Biland/front.JPG
http://www.kartweb.com/TechArt/New_Product_2002/Biland/left.JPG
http://www.kartweb.com/TechArt/New_Product_2002/Biland/right.JPG
http://www.kartweb.com/TechArt/New_Product_2002/Biland/mtd_frt.JPG
http://www.google.nl/imgres?q=biland+engine&um=1&hl=nl&client=firefox-a&sa=N&rls=org.mozilla:nl:official&biw=1600&bih=796&tbm=isch&tbnid=G769xImOpOqKHM:&imgrefurl=http://www.tagaustralia.com.au/engines.html&docid=-UBTRBZo60JWLM&imgurl=http://www.tagaustralia.com.au/images/biland_engine.jpg&w=140&h=112&ei=uIXCTvflLI6M-wals6n9DQ&zoom=1&iact=rc&dur=297&sig=116062493300115091187&page=1&tbnh=89&tbnw=112&start=0&ndsp=28&ved=1t:429,r:1,s:0&tx=62&ty=22

[PiBoSo]

Which chassis are used with 250 4t engines?
Are there dedicated ones?

[laraarsa]

No, you can choose yourself wich one you want.

[PiBoSo]

Then would it be ok to have a new category with the current KRP chassis but with different engine physics, sound and model?

[Aritz]

Then would it be ok to have a new category with the current KRP chassis but with different engine physics, sound and model?

Yes.

As you say, different physics for this engine; the kart must be harder to turn (+ weight) and better slow RPM torque (4 stroke).

[EVO]

Piboso are you going to make the engine i thought i would make your life easier and give it a shot. 

[PiBoSo]

Piboso are you going to make the engine

That's the plan.

[nmpcs]

Then would it be ok to have a new category with the current KRP chassis but with different engine physics, sound and model?

It would be awsome

[EVO]

Official
http://www.swissauto.com/e/motor/projekt_detail.jsp?ID_Display=20000I
http://www.swissauto250.eu/Midden_Specifications.htm



High res photos
http://www.swissauto250.eu/Gallery.htm
Homologation
www.bridgestonecup.com/docs/2010/swissauto-250-homologation-ffsa-2010.pdf
Spare Parts with drawings
www.swissauto.com/swissauto-webseite/uploadfiles/EN_2000HM.pdf
Manual
www.swissauto.com/swissauto-webseite/.../EN_2000HW.pdf

[EVO]

hope this helps

[laraarsa]

horsepower:35hp@9.500rpm
torque:28Nm@ 8.000rpm
type:1Cylinder 4-stroke engine with balance shaft
valve train: DOHC on roller Bearings, 4valves/cylinder
compression ratio:12,5:1
Lubrication system: integrated dry sump with nikasil coating.
Piston:forged aluminium.
coolsystem:watercooled, integrated waterpump
ignition: digital ECT with rev limiter(13.000 rpm)
starter: Electric started
weight about 26 kg, includes oil and water

[EVO]

weighs less than Rotax max i discrovered