• Welcome to Kart Racing Pro Official Forum. Please login or sign up.
 
November 30, 2020, 03:39:30 PM

News:

Please read the FORUM RULES


Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Russell Hodgson

31
Plugins / Re: Z1 Analyzer
March 26, 2020, 08:43:44 PM
Version 2020.1 of the Z1 Analyzer is now available.  Just like the Dashboard we have updated the numbering sequence - so 2020.1

The big change in this version is that we have rewritten the entire Analyzer to use Direct2D instead of cairo.  This update in the graphics department means we can utilize the GPU when rendering, provide much smoother lines and fonts, get better performance, especially when scrolling around the various track maps in the analysis screens.  It also opens up a lot of doors for us for future development concepts that we would have been unable to do properly with the cairo graphics engine.

The Z1 Analyzer 2020.1 is crisper and faster than before!


The brake points analysis screen makes it easier to see which lap is which with the red and blue track edges.


The driving line analysis screen gets the same Direct2D treatment - better performance and a smoother, crisper display


The Turn Analysis screen has been updated for better performance and a more integrated feel.


We've also added quite a lot of YouTube video links in the Analyzer to provide help on how the various feature work - so make sure you check those out.

We'd also like to thank the entire beta test team - they did a tireless job ensuring the version is as good as it is!

You can download the demo here: https://z1simwheel.com/dashboard/demo.cfm

Existing users can get the update here: https://z1simwheel.com/dashboard/MyDashboard.cfm

Here is the full list of release notes:
* Direct2D - The entire Analyzer graphics engine has been rewritten using Direct2D. This replaces the older cairo graphics engine. This change will allow for improved performance of the Analyzer, and more efficient usage of the GPU when rendering.  In addition it will open the door for many future improvements that would not have been possible using the old cairo rendering engine.

* Graphical improvements - the rewrite process for Direct2D allowed us to update the display of many of the components to bring a more cohesive look to the entire Analyzer.

* Added many links to our YouTube videos to help explain how to use, and get the most out of, the Z1 Analyzer.

* When importing external data, we have removed the Track length text field.  The length of the track will now always be calculated using the data contained within the imported file.  This is because allowing the user to enter the track length opened up the possibility of accidentally entering the wrong track length.  An incorrect track length would result in all sorts of issues when attempting to view the data and/or compare it to other laps.

* The version numbering of the Analyzer has been changed. Starting with this version the numbering will be year based making this version 2020.1. This is to bring all three applications onto the same numbering sequence and to make it easier to determine if you have the most recent version of the software.

* The Z1 Analyzer will now notify you of new versions with an overview of the highlights of the new version. This notification will be displayed on two consecutive start ups once the update is available.

* Windows 7 is no longer officially supported.  While the Z1 Analyzer can still be installed on Windows 7 and run on it, there may be issues that arise as Windows 7 is now EOL.

* Note for this release the Print functionality has been disabled.  It will be reinstated soon.

You can download the demo here: https://z1simwheel.com/dashboard/demo.cfm
32
Plugins / Re: Z1 Dashboard Software
March 25, 2020, 08:04:45 PM
Version 2020.1 of the Z1 Dashboard is now available! Yes the version number is 2020.1. We have updated the version numbers of all three applications (Dashboard, Analyzer and Server) to this new format as they are all part of a single suite of applications, and having different version numbers for each applications was becoming confusing. So version 2020.1 is the new number sequence for all of them.

In this new version we have 6 new dashboards - including the 718 GT4, Holden ZB and Ford Mustang GT.

718 GT4 Dash


Ford Mustang GT Dash


Holden ZB Dash


In addition you can now specify the FPS that each instance of the Dashboard will run at. This lets you use refresh rates that best suit your system and the dashboard being used.

Specify your target FPS rate


And the units of the various temperature, fuel levels and fuel pressure warning for the dashboards are now in the currently selected units.

Warning units are now in the currently selected units.


You can download the demo here: https://z1simwheel.com/dashboard/demo.cfm

Existing users can get the update here: https://z1simwheel.com/dashboard/MyDashboard.cfm

Full release notes:
* Two New Dashboards: 718 GT4 Dash and 718 GT4 Dash B. The B version is the same dash without the LEDs.

* Two New Dashboards: Ford Mustang GT Dash 1 and Ford Mustang Gt Dash 2. Dash #1 is the Race dash and Dash #2 is the Launch dash.

* Two New Dashboards: Holden ZB Dash 1 and Holden ZB Dash 2. Dash #1 is the Race dash and Dash #2 is the Launch dash.

* There is now a new shift light pattern. This is 'All CTR iRacing'. This pattern will illuminate the LEDs from outside towards to center using the shift light start and end numbers provided by iRacing. Obviously this only work with iRacing.

* You can now control the frame rate target of the Z1 Dashboard. In the General settings tab there is an option called 'FPS Target'. This can be set between 1 and 60 fps. The default is 45 fps. The slower the frame rate the less CPU will be used. This can help if you find the Z1 Dashboard is using more CPU than you want it to. Also some dashboards don't need to be updated as often as others - for example standings dashboards, weather dashboards, etc. So you can adjust the FPS to suit the dashboards you have displayed. This can be done for each individual instance. This replaces the 'Sleep' parameter in previous versions.

* The Oil Flash and Water Flash temperatures (in the car 2 tab) that control when certain dials on the oval cars will begin to flash now use the currently selected temperature units. Previously they were always in Fahrenheit. Now if you have Celsius selected as your temperature units then these numbers will represent Celsius temperatures.

* The Oil Temp Warning and Water Temp Warning temperatures (in the car 2 tab) that control when the oil or water temperature warnings are displayed now use the currently selected temperature units. Previously they were always in Celsius. Now if you have Fahrenheit selected as your temperature units then these numbers will represent Fahrenheit temperatures.

* The Fuel Level Warning number (in the car 2 tab) that controls when the low fuel warning is displayed, and when the background flashes for low fuel, now uses the currently selected units. Previously it was always in liters. So now if you have gallons selected then the number is referring to gallons; if you have kilograms selected then the number would refer to kilograms, etc.

* The Fuel Pressure Warning number (in the car 2 tab), that controls when the fuel pressure warning is displayed, now uses the currently selected units. Previously it was always in Bar. So now if you have metric pressure units selected the number will represent kPa instead of Bar.

* The settings dialog has been made bigger so that you can see more of the options without having to scroll. As the Dashboard has evolved over the years is has become extremely customizable, leading to many options in the settings dialog. By making the dialog larger you can see more of these options without having to scroll as much.

* Certain error messages will be displayed at the top of the dashboards. These are intended to help when something goes wrong which might otherwise be difficult to either solve, or know that an issue occurred.

* The version numbering of the Dashboard has been changed. Starting with this version the numbering will be year based making this version 2020.1. This is to bring all three applications onto the same numbering sequence and to make it easier to determine if you have the most recent version of the software.

* The track map creation process has been updated. The Dashboard now attempts to properly orient the track map so the corners turn in the correct direction.

* Added 'Track Map' as a starting option in the Display tab. This lets you open the Z1 Dashboard to the track map when starting up.

* Updated the time display in the standings dashboards. Now if there is an hour or more to go you will see hours and minutes displayed. If there is less than an hour to go you will see minutes and seconds displayed.

* The update notification for new versions can now be displayed as an image, allowing us to show more details on what is included in the latest updates.

* Updates to the internal architecture to allow for better performance and future functionality.

* Windows 7 is no longer officially supported. While the Z1 Analyzer can still be installed on Windows 7 and run on it, there may be issues that arise as Windows 7 is now EOL.

Download the demo today: https://z1simwheel.com/dashboard/demo.cfm
33
Plugins / Re: Z1 Dashboard Software
February 27, 2020, 03:54:57 AM
Thanks to the great team at PositiveSimRacing the latest version of the Z1 software manual is now available in a Spanish PDF version.

You can download the PDF here: https://z1simwheel.com/dashboard/manual/spanish.cfm

It's got all the details you need to get the most out of the Z1 Software.
34
Plugins / Re: Z1 Analyzer
February 27, 2020, 03:54:41 AM
Thanks to the great team at PositiveSimRacing the latest version of the Z1 software manual is now available in a Spanish PDF version.

You can download the PDF here: https://z1simwheel.com/dashboard/manual/spanish.cfm

It's got all the details you need to get the most out of the Z1 Software.
35
Plugins / Re: Z1 Analyzer
February 12, 2020, 12:12:40 AM
Version 1.18 of the Z1 Analyzer has a lot of new features.  Watch this video for a quick explanation of what they do and how they work!


Moving The Lap Beacon: 0:38
Stepping Forwards & Backwards Through Your Data: 3:11
Corner Overlays: 4:14
Time & Distance at the Cursor: 6:16
New Data Channels: 7:27
Trying Out License Levels: 8:43


Download the demo here: https://z1simwheel.com/dashboard/demo.cfm
36
Plugins / Re: Z1 Analyzer
January 27, 2020, 06:23:52 PM
We've just released version 1.18.2 of the Z1 Analyzer.  This fixes a bug in version 1.18 with the lap shifting feature where the base lap could 'shrink' if it was moved back and forth multiple times.

Existing users can get the update here: https://z1simwheel.com/dashboard/MyDashboard.cfm

New users can download the demo here: https://z1simwheel.com/dashboard/demo.cfm
37
Plugins / Re: Z1 Dashboard Software
January 24, 2020, 11:27:06 PM
As of version 4.21 of the Z1 Dashboard you can now stream your sim's data over the internet. This lets other Z1 users connect to your data stream and view the sim's data just as if they were sitting next to you.


If you are running endurance races and want your teammates to help you with strategy, or want to help other drivers with real time engineering or coaching, this is the solution.

How To Stream Your Data: 0:51
Connecting To A Data Stream: 5:21
Disconnecting A Data Stream: 8:08

Download the demo today: https://z1simwheel.com/dashboard/demo.cfm
38
Plugins / Re: Z1 Analyzer
January 10, 2020, 11:34:09 PM
As of version 1.18, the Z1 Analyzer lets you play back videos. You can sync these videos with the telemetry or play them back independently.  You can also jump around in the video by clicking anywhere on a trace or track map. It is as easy as that!


Video is a great way for you to see exactly where you are placing your car in a turn, and what the car is doing at any moment.  Make sure you are using the latest version of the Analyzer to get the most from your racing or track day.

Download the demo today: https://z1simwheel.com/dashboard/demo.cfm
39
Plugins / Re: Z1 Dashboard Software
January 03, 2020, 08:24:33 PM
We've put out updates to the Dashboard (v4.21.1), Server (v1.19.1) and Analyzer (v1.18.1).  These updates fix a bug with the internet streaming where your order number would be incorrectly rejected when trying to connect.  Everyone should update to this version to use the streaming service.

Also there are a few small tweaks in these updates:
Analyzer 1.18.1:
* Relaxed the check which determines if the Analyzer is off-screen or not.  This should help with remembering the position of the Analyzer's window when it is close to the edges of your screen.

Dashboard 4.21.1:
* Adjusted the minimum allowed size of the Dashboard window to be half of what it was in 4.20.  It is now 240 x 136.

Download the demo today: https://z1simwheel.com/dashboard/demo.cfm
40
Plugins / Re: Z1 Analyzer
December 31, 2019, 05:02:55 PM
Version 1.18 of the Z1 Analyzer is now available!

There are many improvements in this version, but the big one is the addition of video.  You can now open videos of your laps and have them play back in sync with the telemetry. You can sync the video and the telemetry so that whenever you move to a different point in the video the telemetry will move to that same point, and vise-versa.


We've also added corner overlays, making it easier to see where the corners are in your traces. As with everything in the Analyzer these overlays are completely customizable.


The current time and distance of the cursor is now displayed in the status bar at the bottom of the Analyzer's display.  New to this version is the ability to step through the telemetry using the left/right arrow keys.


And for track, educational or commercial users you can now adjust the beacon position of the base lap in one of three ways: through a dialog, or keyboard arrows, or using the mouse.


Remember the Z1 Analyzer comes with the Z1 Dashboard and Z1 Server!

Download the demo today: https://z1simwheel.com/dashboard/demo.cfm

Existing users can get the update here: https://z1simwheel.com/dashboard/MyDashboard.cfm

Here is the full list of release notes:
* 64 Bit - The Analyzer is now a 64 bit application.  This was necessary for the video option below.

* VIDEO - The Z1 Analyzer now supports opening and playing back mp4 and avi video files.  To display the video window go to Display->Show Video.  The video window is exactly like any other window in the Analyzer.  You can drag it and resize it as you like.

To open a video click on the folder icon at the bottom of the video window.

To play a video click on the play icon at the bottom of the video window. Just like the playback of telemetry data, each time you click the play button the playback speed will be reduced by half, down to 1/16 speed.  At that point clicking it again resumes full playback speed.

To pause a video click on the pause icon at the bottom of the video window

To stop playback of a video click on the stop icon at the bottom of the video window. Clicking the stop button also resets playback speed to full speed.

You can step forward and backwards through the video frame by frame by using the forward/backward step icons.  Each click of one of these icons will advance/rewind the video by one frame.

You can jump to the start or end of the video by using the 'move to beginning' and 'move to end' buttons.

You can fast-forward or rewind the video by using the fast-forward or rewind buttons.

* There is a sync button in the video button bar.  This looks like two arrows pointing at each other.  When this button is selected it will turn green.  When it is selected if you play, pause of stop the telemetry or video then the other will also play, pause or stop.

* There is a flag button in the video button bar. This is used to specify where the start/finish line is for the lap. You should use the video controls to move the video so that the car is right at the start/finish line.  Then click this button.  Doing so will tell the Analyzer where the start/finish line is for this video and this lap.  Once this has been done, the Analyzer will keep the video and telemetry in the same position on the lap when you click to a specific location on a trace or the track map.

* You can now step forward/backward through the telemetry using the right/left arrow keys. Each time you press one of the keys you'll move forward or backward by one data point in the lap. This makes it easier to control exactly where you are in the lap.

* The Analyzer will now use both steering inputs and lateral g-forces to determine the corners of a track. The g-force threshold is 0.6G to determine the start of a corner. Note if the track has track edges defined then those will be used to determine corners instead of steering or g-forces.

* There is now an option to show corners overlayed on the traces. This option is located under Display->Show Corner Overlays.  You can choose if you want the overlays to be filled on the trace, or just an outline by ticking the 'Fill Corner Overlay' option in the settings General tab. You can choose the colors used to draw the left and right hand corners in the Screen Colors and Print Colors under the Track Map section.  You can have different colors for screen display and printing purposes.

* There is now an option to shift the base lap forwards or backwards as compared to the main lap. This is intended to let you line up two different laps that have used different beacon positions.  This would occur most often in real world imported laps. In sim laps it is highly unlikely you would need this feature.  The option is available under the Laps->Shift Laps menu option.  In the dialog you can then enter the distance you want to move the base lap in meters, centimeters or feet.  A positive number shifts the lap to the right, and a negative number shifts it to the left.

You can also shift the lap forward or backward by one data point by using the Shift+Right/Left Arrow keyboard combination, or by choosing the Laps->Shift Forward or Laps->Shift Backward menu options.

You can also use the mouse to shift the lap forward or backward.  Hold the Shift key down and left click on a trace and drag the mouse. This will shift the base lap trace in sync with the mouse movement.

Note shifting a lap does not permanently change its beacon position.  It only moves it while the lap is currently open.

This feature requires a track license or higher.

* The status bar now displays the current time and distance at the cursor position. This data is show as "cursor: 0:24.817 | 3358.3 feet". If you have distances set to metric then you'll see the distances in meters. This information is based on the main lap and not the base lap.

* Added six (6) new traces: Yaw, Pitch, Roll, Yaw Rate, Pitch Rate and Roll Rate.  These are available for all users under 'Chassis' in the trace popup menu for those sims that support this data.  These traces are also available for use with custom traces.  For track and commercial users they are also available for imported data. And for commercial users they are available in the 'Limits' settings of the commercial settings tab.

* Updates to how saved layouts are handled with respect to resizing them if the window size differs from when they were saved, and if more traces have been added to the Analyzer since the layout was created. Note these changes only effect layouts saved in this version and forward.

* When running the demo you can now choose between the four different license levels (standard, track, educational or commercial). This lets you try out each license level to determine which is right for you. As before, the demo will last 15 minutes regardless of the license level selected.  After the 15 minutes is over you will have to restart the Analyzer to get another 15 minutes.

* There is a new license level - educational.  This is intended for educational institutions.  For details on this license level and what it offers please visit https://www.z1simwheel.com/analyzer/licenses.cfm

Download the demo today: https://z1simwheel.com/dashboard/demo.cfm
41
Plugins / Re: Z1 Dashboard Software
December 30, 2019, 10:25:38 PM
Version 4.21 of the Z1 Dashboard is now available!

This latest version bring a huge new feature that allows you to share your data over the internet with your team mates!  It is quick and easy to create a data stream for your team mates to connect to.  Choose a name, what data you want to share and whether or not you want to set a password.

Set up your data stream in the Z1 Server


The Z1 server shows your data stream's status


Click the new icon on the Z1 Dashboard to view the list of currently available data streams


Select a data stream using the Z1 Dashboard


We have also introduced a new license level - Educational.  This is for schools, colleges and universities so they can use the Z1 software in a teaching environment.

As we now have four license levels (standard, track, educational and commercial) you can now choose which license level you'd like to try out when running the demo.

Select license level when running the demo.


Download the demo here: https://z1simwheel.com/dashboard/demo.cfm

Existing users can download this update here: https://z1simwheel.com/dashboard/MyDashboard.cfm

Full list of release notes:
* SENDING DATA OVER THE INTERNET
As of this version you can now transmit your car's data over the internet so that other users of the Z1 software (Dashboard/Server at this time) can view that data from remote locations. You can either choose to send your data, or you can choose to connect to a data stream from a driver who is transmitting their data.  Multiple people can connect to a driver's data stream.

Usages of this feature would be to allow teams of drivers to see the data of other drivers in their teams when those drivers are on track.  Or a driver coach could monitor a driver's actions while they are in the car.  Note that this is the internet and there will be lag, so the data may not be exactly real time to the millisecond.


SENDING DATA
The Z1 Server is used to send your data over the internet.  All you have to do is start the Z1 Server and any sim currently supported by the Z1 Server software.  Then click on the settings icon at the top  right of the Z1 Server screen.  There is a new tab called 'Internet'.  Select this tab. You can then enter a name for your data stream.  Your driver name would be a good example of the name to enter here.  You can choose to password protect your data stream by entering a password.  If you leave the password blank then anyone can join your data stream.

There are three types of data you can select to transmit.  You can choose any combination of the three.
CAR STATS: This is sent once a second and includes your lap times, sector times, lap completed, total laps, car position, etc.

CAR DATA: You can choose either Brief or Full.  This data is sent as frequently as possible.
Brief data includes rpm, water temp, water pressure, oil pressure, oil temp, speed, fuel remaining, voltage, longitudinal acceleration, lateral acceleration, vertical acceleration, throttle, brake, steering percentage, steering angle, ERS level, ERS max level, max ERS per lap, ERS used this lap, ERS deploy percentage, gear, various warning flags, tire inner temp, tire middle temp, tire outer temp, tire pressure, brake temp, tire wear, wheel speed.

Full data includes: lap percent, rpm, water temp, cylinder head temp, water pressure, water level, oil pressure, fuel pressure, oil temp, speed, fuel remaining, fuel level percent, fuel density, voltage, longitudinal acceleration, lateral acceleration, vertical acceleration, throttle, brake, clutch, throttle raw, brake raw, steering percent, steering angle, steering torque, steering torque percentage, power MGUK, torque MGUK, power MGUH, ERS level, ERS max level, max ERS per lap, ERS used this lap, ERS deployment percentage, manifold pressure, fuel per hour, yaw north, center front spring ride height, center front spring shock deflection, center front spring shock velocity, center rear spring shock deflection, center rear shock velocity, gear, various warning flags, tire inner temp, tire middle temp, tire outer temp, tire pressure, wheel ride height, wheel shock deflection, shock velocity, brake temps, tire wear, wheel speed, tire carcas inner temp, tire carcass middle temp, tire carcass outer temp, brake pressure, wheel rps, wheel camber.

LOCATION DATA: You can choose either Brief or Full.  This data is sent once a second.  It includes the data on your competitors.
Brief data includes: Just their location on track.  You'll see the circle for each car on the track map, and nothing else.

Full data includes: Their location on track, fastest lap time, last lap time, fast lap number, lap completed, iRating (iRacing only), safety rating (iRacing only), driver name, car name, car class, car number (for supported sims)



Click the connect button to connect to the server.  You should then receive a message confirming your connection.  Then close the settings dialog to start your data stream.

When you are connected to the internet you will see the word 'Internet' highlighted in white on the main Z1 Server screen.  You will also see your average ping to the server.

To disconnect you can either just quit the Z1 Server, or go back to the Internet tab and click Disconnect.  Note if our servers loose contact with you for more than 10 seconds you will be automatically disconnected.


RECEIVING DATA
The Z1 Dashboard is used to receive data from the internet.  To do so, start the Z1 Dashboard, but do not connect to a sim.  On the Waiting For Connection screen, you will see an icon that looks like the world with a ring around it.  Click on this to bring up the list of available data streams.  You can scroll the list if necessary using your mouse wheel.  You can refresh the list by clicking on the blue refresh icon at the top right of the window.  The list will show the name of the data stream (driver), the sim, track and car being used for that stream.  In addition you'll see the ping that stream is getting to our servers, and the number of other drivers currently connected to the stream.  If the stream requires a password there will be a small padlock icon to the left of the driver stream name.

Your ping to the server is listed at the top of the display.

To select a stream to view simply double click on the desired data stream.  If that data stream requires a password then you'll be prompted to enter it at this time.  A confirmation dialog will be displayed letting you know if you were able to connect to the data stream.  If successful then this window will close and you'll be viewing the Z1 Dashboard as you would if you were connected to a sim.

Note obviously you cannot control what the other driver is doing.  You are just watching them.  You can still change dashboards as you would if you were driving.  This allows you to view the data in a way that is useful to you.

To disconnect from a data stream, simply close the Z1 Dashboard.


ACCOUNT TIME LEFT
You'll note that on both the Z1 Server and Z1 Dashboard there is a line saying 'account time left'.  This display is in hours and minutes.  This data streaming service is a pay service.  We have to support it with servers and bandwidth, which we have to pay for.  Because of this the use of the server will be charged at 50 cents per hour.  You can purchase time for the service in $5 blocks (10 hours a time).  Every user of the Z1 software will be given 10 free hours so that they can experience the data streaming service.

When your account time left reaches zero your data stream will be terminated until you add additional time to the service.  This can be done by going to the My Dashboard page (https://z1simwheel.com/dashboard/MyDashboard.cfm), entering your order number, and purchasing additional time there.


REGISTRATION
You must have registered the Z1 Server and/or Z1 Dashboard using your order number for this feature to work.


* When running the demo you can now choose between the four different license levels (standard, track, educational or commercial). This lets you try out each license level to determine which is right for you. As before, the demo will last 15 minutes regardless of the license level selected.  After the 15 minutes is over you will have to restart the Analyzer to get another 15 minutes.

* There is a new license level - educational.  This is intended for educational institutions.  For details on this license level and what it offers please visit https://www.z1simwheel.com/analyzer/licenses.cfm

* The default track map is now a circle.  This is displayed if a track map does not exist for the selected track.

Download the demo today: https://z1simwheel.com/dashboard/demo.cfm
42
Plugins / Re: Z1 Analyzer
July 17, 2019, 11:49:34 PM
In this video we discuss what we've been up to over the past month and what our goals are for the next month or so.


Including updated on the website, emails, current versions, sim compatibility, future feature lists and more.

The current demo can be downloaded here: https://z1simwheel.com/dashboard/demo.cfm
43
Plugins / Re: Z1 Dashboard Software
July 17, 2019, 11:45:07 PM
In this video we discuss what we've been up to over the past month and what our goals are for the next month or so.


Including updated on the website, emails, current versions, sim compatibility, future feature lists and more.

The current demo can be downloaded here: https://z1simwheel.com/dashboard/demo.cfm
44
Plugins / Re: Z1 Dashboard Software
July 16, 2019, 11:11:11 PM
We just released version 4.19.1 of the Z1 Dashboard.  This fixes a few bugs we found in version 4.19.0.

* Fixed an issue with Edit Mode where if you exited the sim before exiting the Z1 Dashboard then any changes made with Edit Mode were not saved.

* Fixed an issue with the Cadillac dashboard where the brake bias did not line up properly in the display.

* Fixed an issue with the Cadillac dashboard that caused a white area to be displayed at the bottom of the dashboard after in-car settings were changed and displayed on screen.

Existing users can download the update here: https://www.z1simwheel.com/dashboard/MyDashboard.cfm

You can download the demo here: https://www.z1simwheel.com/dashboard/demo.cfm
45
Plugins / Re: Z1 Analyzer
July 12, 2019, 06:55:00 PM
One of the great unique features of the Z1 Analyzer is Track Edges.  This lets you see where the edges of the track are when viewing your driving line.  A driving line shown in empty space just doesn't help much.  But once you add the left and right edges of the track you can really see where you are on the lap.

Driving line with Track Edges showing:


We've updated the list of available laps to show which tracks have pre-defined track edge files.  When you view a lap from one of these tracks the track edges will automatically be downloaded from our servers so you can easily and properly view the driving line on your Z1 Analyzer.

The new Track Edge icon shown on our website indicates pre-defined track edges:


See what is available here: https://z1simwheel.com/analyzer/availableLaps.cfm

In addition to the track edges there are over 27,000 laps that you can compare yourself against!