Messages

Kart Racing Pro may crash, but doesn't have the "power" to lock a PC.
Is memory ok? Is power supply unit powerful enough?

Please try updating motherboard chipset drivers.

Is any PC component overclocked?

Hi PiBoSo,
Thanks for your reply.
The driver is  version 186.14
(8.15.11.8614)
last updated 06.06.09
Is that Ok? I will look for an update.

Those drivers are old and then an update should hopefully fix the problem.

Are graphics card drivers up to date?

Are temperatures inside the computer case ok?

Apparently SoftTH doesn't like OpenGL: http://www.kegetys.net/forum/index.php?topic=2498.0

Please try running Kart Racing Pro as administrator: right click on icon -> "Run as administrator".

Keep "low speed" control pressed and use throttle to move forward and rear brake to move backwards.

To move the kart backwards there is the "low speed" control.

There is no option to disable accelerations effect on cockpit view.

The speed must be between 20 and 60 km/h during rolling start. The limits change to 30 and 50 km/h inside corridors.
There is a second of penalty for each km/h above or below limits.
Please note, however, that because of online lag the speed on server may differ.

It should do, after 15 minutes. This delay will be shortened in next release.

The problem should now be solved. The fix will be in next build.

Create a dedicated server. My question is: Can I capture the telemetry data in real time of all drivers on track? My users are maniatic in this.... 

Thanks and great job!!!!!!!!!!!!!!

You can only have telemetry for local kart.

Hi, is there a way to translate the combo box (for example the one for Tyre compound Hard, Soft, Wet or the terms Tight, Loose, Vertical, Flat, Out in Chassis setup)?

Thank You

Marco

No. All setup settings are hardcoded.

this is my dedicated.ini

[race]
quick_race = 1; 0 or 1, if set to 1, practice, sighting lap and warmup lap are skipped
practice_length = 10;
minutesqualify_length = 10;
minutessighting_lap = 0; 0 or 1
warmup_lap = 0; 0 or 1
race_length = 15; % of full length

but in the server i have 20 minutes of qualifing! 
i want only 10 min of qual

There is a typo, this should be:

Code Select Expand


[race]
quick_race = 1
practice_length = 10
qualify_length = 10
sighting_lap = 0
warmup_lap = 0
race_length = 15