Could anyone make any of the tracks for the Rotax karting UK British championships.
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Quote from: PiBoSo on November 12, 2013, 02:11:13 pm
It is important to correctly setup the steering wheel.
1 ) In the steering wheel profiler, disable the centering spring and damping, or at least let the software override them.
2 ) Take note of the rotation ( the suggested value is 180 ).
3 ) Start Kart Racing Pro and click on Settings -> Input -> Calibration.
4 ) Move all the inputs to their full extent.
5 ) If you have other controllers connected as a separate device, select them from the dropdown menu at the top of the calibration screen.
6 ) Repeat from 4) until all controllers have been calibrated at the same time
7 ) Then leave all inputs of all controllers perfectly centered / released before pressing "Ok".
8 ) Click on the right of Controls -> Steer and steer LEFT to assign the control.
9 ) Under Advanced -> Steer, set deadzone to 0, linearity to 100 and leave smooth unchecked.
10 ) Enable force feedback and set strength to 100%, deadzone to 0% and linearity to 100%
11 ) Enable wheel rotation and set it directly or use the wizard. In both cases the value should match the rotation set in the profiler.
12 ) If you are experiencing vibration on straights, please try increasing force feedback deadzone in steps of 5. This shouldn't be needed on the Logitech G25 and G27.
13 ) If you feel the force in the center is a bit weak, you can try lowering the force feedback linearity.
This is how the FF curve looks like at 0 ( top ) and 100 ( bottom ) linearity: