Messages

i can do the kali paint for you brother 

Really nice job mate, congrats.

But when i download the heltmet, i cant actually open the winrar, it says its broken and cannot be open

If you want less front width, you have to put the spacers to the outside, if you remove them the wheel will be moving all the time = not good

To tight the nut , tight it properly, then loose it little bit, just enough you can roll the spacers a little bit, not too much tho, you dont want to see the tyre overtaking you down the straight

When you turn the steering to the limit, the inside wheel will go back just a little bit , it happens on every kart and is done on purpose.

The noise thing, shouldnt be a problem with the track , i dont think kart tracks has a db limit or something like, anyways, the louder sound might be because the exhaust, take a look at it and check if it has any small fissure , or its just the fiber at the exhaust its shorter than it should be or its too old.
I dont really know much about honda cadets as here in Spain that engine doesnt exist but i hope i help you out

I have only tried with the X30 mods, but im guessing its the same with all the mods

Im asking if anyone whos how to fix this.
When i try to join a server with a Engine mod , my game crashes while loading, but i can join and drive in Testing.
It works fine with the In-game karts.

Also, i've linked the game with Steam

Is the template of the M6 Bodywork released already?

Website its pretty good.
I recommend to create another headland where you write the review of the races and leave the just for photos the "Home".
And if you going to write over a photo, i recommend to use White letters with black borders around it. Sometimes its difficult to read because of the Black letters over black/dark gray background

I recived a penalty for it alredy and accepted it so i dont know why you say that

anyway see you in the next round

when was that? I only remeber that you started on Pole and just as we cross over the yellow line , you turnt completly to the left , but didnt worked , and i was in P1 after that so you just went on the grass and didnt brake on Turn 3

it was in the formation lap , shame i stop to record ,on the Heat 1 you just crashed me twice in 3 corners. What a shame

https://youtu.be/OkmVzT-1zTY

Hi.
Here are some paints i made for the OTK,CRG And MSKart.

OTK/TB Kart 2018
https://www.dropbox.com/s/r6sf5kquosvcjmc/TB%20Kart%202018%20OTK.pnt?dl=0

CRG/TB Kart 2016
https://www.dropbox.com/s/1bluukwji8ovqy9/TB%20Kart%202016%20CRG.pnt?dl=0

MSKart/ Vemmekart 2018
https://www.dropbox.com/s/20f7lp9nsewqg2t/Vemmekart%202018.pnt?dl=0

Username: Hugo Hernandez

Chassis: OTK

Number: 72

Nationality: Spain

Is this still going ahead?

Sadly not