• Welcome to Kart Racing Pro Official Forum. Please login or sign up.
April 21, 2021, 01:24:09 AM


Please read the FORUM RULES

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - Schwoni

Racing / Trainer
October 07, 2012, 02:31:21 AM
Here a trainer files for you to practise, 100 ccm ;)

Paste here:
C:\Users\urpcname\Documents\PiBoSo\Kart Racing Pro\trainers
put all .trn files in that one folder, krp know which trainer is from which track.

choose escourse 100ccm in testing mode, in track menu choose trainer, and load that file. You will have my lap saved and i drive infront of you then. it look like normal kart but is not collidable.
It is not important which class you choose, you also can try to beat it with shifter. I always drive with 100cc. Have fun ;)

100cc schwoni.trn is from Es Course.
Other Addons / Bodykits
October 06, 2012, 10:26:00 PM
How all that new stuff have too look? if we wanna create a bodykit, do we have to create the whole bodykit? or each single part? place centered and export like in gp bikes? if we have to create the whole bodykit then we use the middle of all parts together? so middle of kart? intakes,tires,engines are one small part, so just place centered and export and it fit right? do something need a name? holes of airfilter for example? that the hand know what to cover? is it possible to add new engines?
Hi piboso,
if i play gp bikes all is fine but if i chenge after gp bikes to krp i always have to calibrate the g27 again complete new also all buttons. if i switch after that back to gp bikes there are no problem with 360 controller.
But krp forget the settings, it always think i would play with that 360 controller too.
wish to have that fixed in next beta
Off-Topic / Height maps.
July 18, 2012, 11:26:09 PM
Someone knows how to crate heigthmaps? or a good programm for that? maps like this
Suggestions and wishlist / Brake Pressure
June 30, 2012, 12:35:39 AM
The Brake Pressure is wierd. In real i have a very sensitive brake, i just touch the brake a little bit and it block.
In Krp if u use a pressure of 100% it block very fast too but the kart start spinning, in real u can control that normally u do nothing exept steer straight.
i use in krp 66-70% pressure, i do fullbrake it take a short time, it block and is very good controllable.
So it seems to me that the brake is more calculated to the rear tires as to the axle. I don`t know how to explain but 100% pressure make the kart spinning, also if u just steer straight.
It should be controllable like 66% pressure but block without time if i press the pedal full.
If wished i could do a video for example.


i think u can see very good what i mean. 2 first tests was with 100% last 2 with 66%

u can`t brake to 0 KM/H with 100% without spin.

And if i use 66% or 100% shouldn`t be important, block is block.
Racing / Totourial How To Change Starting type.
May 08, 2012, 05:19:41 PM
Here`s a small totourial How to change from rolling start to light start. ( ONLY SERVER HOSTS AND DEDICATED SERVERS HAVE TO DO )

Go to:
C:\Program Files (x86)\Kart Racing Pro\karts\c-kc1

There u find the c-kc1.ini file, open with editor ( notepad ) and change in rolling start the 1 to 0  (ex. rolling start=0 )

Save and done. Do the same for tony Kart.

Go to:
C:\Program Files (x86)\Kart Racing Pro\karts\t-kc1

There u find the t-kc1.ini file, open with editor ( notepad ) and change in rolling start the 1 to 0  (ex. rolling start=0 )

Save and done.

Media / New Tire Texture
April 10, 2012, 09:16:19 PM
Only wanna show u all the new used tire texture which is fucking awesome ;D
i noticed today after 17 laps race with soft tires.

Support / What are theese Ranking points?
April 01, 2012, 10:12:53 PM
Piboso i don`t understand that points.
Where do i get them or why i get them? i have had them suddenly after 10th race i won i think.
I wanna understand that system ^^
Bug reports / New Server Bug
March 31, 2012, 10:17:09 PM
There is a new bug happens suddenly if someone join the server. The Problem is that there are suddenly 2 guys  with the same name and one is lost, The lost guy in that list u can see in chat but not in results screen and this lost guy can`t set times. It look like this :

Bug reports / setup page on track
January 18, 2012, 09:52:47 PM
a few mins after that screens the game crash

Off-Topic / Happy new year
December 31, 2011, 07:12:32 PM
We Wish you all a happy new year!!

Tracks / [Release] Büren Final
December 15, 2011, 11:18:21 PM
Final WIP ;)

Download Link Beta 5:

Also on Database

Fixed Textures, 3d powerlines and fences, new bushes, 3d trees, benches, wall pictures, Rubber on Track. alsomst all is 3d now so i used insvisible walls to improve fps but on some invisible walls u can get stuck.
I hope i can find a solution for this. also rubber build is a bit weird sometimes pointwise. i try to fix this things, normally it is the final.

Media / Practice Iceman Marco and Schwoni
November 12, 2011, 12:08:25 AM
Karting De Joigny







Bug reports / Send Setup
November 01, 2011, 01:23:03 AM
We can send setups but we always see them as default. Name is shown but not the settings i tested with 5 guys and always the same.
General Discussion / @ Bierbuden.de server
June 17, 2011, 11:02:45 PM
Hi Guys,
Please redownload büren,  because i have changed small things and if we try to join we get a data missmatch because u use the old version i think. ;)
Bug reports / Suspension
May 01, 2011, 03:04:55 PM
the tires in corners look like suspension.

take a look
Suggestions and wishlist / Tyre pressure
April 28, 2011, 04:58:40 PM
For Beta3 it would be great that we can choose more tyre pressure because we only can choose max 90kpa = 0,9 bar.
In real we use bar for example in rain we drive with 1,1 -1,3 bar min. Thats not possible here and on some tracks the tyres are too hot after 5 laps.
That problem we can`t fix with so less pressure.