Messages

This is a problem with running bodnar box with G25/27 or now with Fanatec running wheel and pedals separate. I'm trying to help resolve this problem because a lot of my friends run the same way as I do. I've never yet been able to try the demo.

Still can't calibrate wheel and peddles both G25 and Fanatec GT3 RS V2. On both the wheel and peddles are hooked up individually via USB.  The sim sees them but they wont assign.

Ah, I see. Yesterday I got a similar problem when assigning axes/buttons. After calibrating the G25 / VPP (needs to be done individually) I was not able to assign the steering axis.

Later I found out that the shifter was still in reverse gear position. That was causing the auto-detection to not work properly (i guess, because it was thinking i was continuesly pressing a button). After putting the shifter to neutral I was able to successfully assign steering and remaining controls.

Maybe this control-auto-detection-thing is a little bit too sensitive for your setup (guess the bodnar box makes it even more ... noisy)? The bodnar box is only an adapter cable, or? Does assigning of controls work without the bodnar box?

HaHa yea I know the shifter in gear deal that's why I put it in sequential mode for setup.
I have all my cables wrapped an tied an I'm not going to go through that.
It took a while to get it the way I want it so I'm not going to connect and disconnect the Bodnor just for one Kart an one track, guess I'll never know lol. Thanks Wulle I appreciate the help man.

You are probably too upset with the project, but it would be a great help if you could please locate controls.txt and calib.txt to send them to support@kartracing-pro.com

Sent Files yesterday. Thanks.

Wulle I can Calibrate my G25 but once I go out to assign controls the sim will not recognize my wheel outside calibration.

It will see the pedals. I have a Load Cell and Bodnar Box on G25 pedals. Axis RY J1 comes up under Steer and when I go to Throttle Steer goes to Unassigned and Throttle goes to Axis RY J1.Thanks man

I wont be buying this. I'm going to tell everyone I know not to buy it too. Just another game where people wont do the work before they release it. FIX YOUR CONTROL SETUP !!!

and your telling me to get a life.

AWESOME!

Just what is it you trying to control. No one was talking to you about anything so why do you feel you have to respond. If you don't want to help just go away and yes find something else to do fan boy.

You are probably too upset with the project, but it would be a great help if you could please locate controls.txt and calib.txt to send them to support@kartracing-pro.com

Will do hopefully this will give you the insight you need to fix what's going on here. Thanks

I wont be buying this. I'm going to tell everyone I know not to buy it too. Just another game where people wont do the work before they release it. FIX YOUR CONTROL SETUP !!!

Wow.  Seriously?

MAYBE IF YOU TYPE EVERYTHING IN CAPS PEOPLE WILL UNDERSTAND YOUR A COMPLETE ASS H0LE RIGHT AWAY!!!!!IT WOULD SAVE YOU A TON OF TIME!!!!!!I MEAN, GET RIGHT TO IT!!!!!!

Fact:
- Computers only do what you tell them too............Try to wrap your mind around that for a minute......... Then hopefully you will realize what an ass you made of yourself and apologize  when you obviously know it works on hundreds of systems similar to yours.  I have installed it flawlessly on four different systems, running four completely different wheel and pedals combos, on three different operating systems. All of them had no problems calibrating (maybe me and the thirty other people on iRacing that it worked for were just really lucky. huh?)

Plus,  It says beta on the download page aswell...... written right above where you got it for free....

This guy wrote a F-ing sim that rivals many out there.....literally by himself. 

Good luck with the rest of your miserable existence......lol (that means im laughing out loud as i type this....if you didnt know that pops)

Thanks for making iRacing's Amazing community look like a bunch of deuche bags......

JUST MY NOBLE OPINION THOUGH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!:)

Kevin

I'm not the only one with this same problem so get a life punk.

Controls are on top of TODO list for next release.
In the meantime, please try calibrating all of your peripherals before assigning controls. There are 2 arrows on top of calibration page to cycle between plugged inputs.

I know how to configure controls. I have a G25 with a Load Cell Brake and Bodnor Box. I play iRacing-GTR EVO-rFactor-GT Legends-NASCAR 2003 and I never had a problem like this ever.

 I wont be buying this. I'm going to tell everyone I know not to buy it too. Just another game where people wont do the work before they release it. FIX YOUR CONTROL SETUP !!!

same trouble with throttle / brake / clutch and wheel : once calibration done if i click on brake it assign another key and it's hard to assign wheel...if i quit and launch game i need to re-calibrate and assign.

I've an G25 for wheel / shifter and use a dongle usb for pedals. Maybe it's this second controller that cause this glitch.

I use the Bodnar box but that should not make any difference the wheel and peddles calibrate they just wont assign.

After calibrating my G25 I can't assign Steer-Throttle-Brake. When I click on it I just get (Axis RY J1) and if I move from one to another it just unassigns the one before and puts up (Axis RY J1). Help please.

My Shifter is not in gear either. It shouldn't be this hard to do something so simple. This is the only sim I ever had a problem with.