Please look at this video http://youtu.be/g8cktZyN6FQ ( preferably at 720p )
Is there anything to change or add?
Even though my post isn't a usefull contribution, I must say, good work PiBoSo :)
In real life i normally got my engine Tempature in the right bottom corner and water tempature in the left bottom corner. While i can change between rpm and km/h on the left top corner. and ofcourse times and laps as you got in the video
It looks good ;), but I prefer the MyChron. That's just me.
Good job, however I also prefer the Mychron, easier to read, less cluttered with information.
I really like the idea that beta 4 this also available on Unipro. You could also put Alfano, I say this as a sujerencia more for the future. :D
Quote from: Hansen24 on September 19, 2011, 06:53:26 PM
In real life i normally got my engine Tempature in the right bottom corner and water tempature in the left bottom corner. While i can change between rpm and km/h on the left top corner. and ofcourse times and laps as you got in the video
Thank you for the reply. Is data printed exactly like in the real one?
Do you have splits? Do you have the difference with the best lap?
PiBoSo well done,aslo nice variaton with Lonato :D
Real life more Alfano Astro :D
Quote from: Barlo on September 19, 2011, 08:24:16 PM
I really like the idea that beta 4 this also available on Unipro. You could also put Alfano, I say this as a sujerencia more for the future. :D
100000000000000000000 ++++
Any modeler with the patience to study the configuration files should be able to create a custom dash.
I use Unipro but I can't help until I return from USA. I barely can see the video using the phone.
When you pass the split or the finnish line, you see the difference of your best lap split or lap.
Anyway, I love the improvement and of course, I will use Unipro in the game aswell!
http://m.youtube.com/watch?gl=US&hl=es&client=mv-google&v=zS7jhrL-0cg&mobileflash=0
Maybe this video can help but is the mobile version link thou, if someone can fix it...
Quote from: Aritz on September 20, 2011, 12:10:17 AM
When you pass the split or the finnish line, you see the difference of your best lap split or lap.
Thank you for the reply.
Where is the difference displayed? For a limited time? And what about the lights? How are they configured?
yey, new lonato layout!! ;)
the "+0.03" (for example) is shown in the place of the time lap for, lets say, 5 sec. I don't really remember for how long.... I am far from home, sorry. I will try to watch some of my videos of youtube and awnser you. By the way, I think (almost sure) Unipro is configurable and you can see instead of the difference, the split time. Of course on the finnish line you always see the lap time and if the lap is the best of the day, a little BEST LAP is shown. Again, I have to watch my videos to rememember exactly how and where is shown. The lap time is shown for more time than the split time or the "+0.03" I think.
The lights are great on Unipro, they are like F1. You can configure them using RPM. For example you can use the right red for 15000 (the expected max rpm) and the next lights (3 green,2 yellow and 2 red) for 300 rpm each. So the first green light will switch on at 13200 rpm (15000-300-300-300-300-300-300) You can use 1000 rpm for each light or whatever you want, but 300 is the best and default value.
I am sure that you already know that, but their website is www. Uniprolaptimer . Com (fix the link, I didnt want to put it correctly because of the laws or copyrights, you know) they have a very good pdf manual for their product.
What is the exact width of the Unipro laptimer?
Quote from: PiBoSo on September 19, 2011, 09:02:46 PM
Quote from: Hansen24 on September 19, 2011, 06:53:26 PM
In real life i normally got my engine Tempature in the right bottom corner and water tempature in the left bottom corner. While i can change between rpm and km/h on the left top corner. and ofcourse times and laps as you got in the video
Thank you for the reply. Is data printed exactly like in the real one?
Do you have splits? Do you have the difference with the best lap?
i doesnt use splits on it only when i cross the finish line i get a difference and and if it were my best time second or thourd best time and so on in the lower right corner
Quote from: PiBoSo on September 25, 2011, 08:13:54 PM
What is the exact width of the Unipro laptimer?
Good question, I will try to anwser it during the day
Is all the rest fixed? Any doubt with the splits? Now I am back and I can test it.
Where is time difference between last lap or last split and best lap displayed? In the upper-right corner?
Lower right corner at the unipro 6003. It gets displayed with the difference beetwen the fastest lap and the lap you just finished. So if i was 2 tenth of a second slower than my fastet lap i will show with for example it was my third fastest time and it was 0.20+. sorry for my bad english
Quote from: PiBoSo on September 25, 2011, 08:13:54 PM
What is the exact width of the Unipro laptimer?
125x80x15
Quote from: Hansen24 on September 26, 2011, 05:04:23 PM
Lower right corner at the unipro 6003. It gets displayed with the difference beetwen the fastest lap and the lap you just finished. So if i was 2 tenth of a second slower than my fastet lap i will show with for example it was my third fastest time and it was 0.20+. sorry for my bad english
yes:
(http://img836.imageshack.us/img836/9181/unled2um.jpg)
(http://img809.imageshack.us/img809/4914/captura1080villar.jpg)
By the way, this is what the screen shows when the Unipro is waiting for the last split (the finnish line) for start counting the time, if there is one split more before the finnish line, the counter will be -1 (or -2 etc) Like other displays, you can setup it for wait until the starting line for start counting the time, if not, you probably will count the laps in one split instead of the finnish line (when the boxes are in the middle of the track mostly)
(http://img21.imageshack.us/img21/5428/captura720villar.jpg)
And this, when you are in the first lap but before crossing the line (obviuos)
(http://img84.imageshack.us/img84/5808/captura1080villar2.jpg)
Anything else?
Note: I had edit the previous post with other photo
Thank you for the info.