Hi, I've just installed the demo and can't configure it to accept both wheel and pedals together.
Wheel: Thrusmaster T300RS
Pedals: Fanatec Clubsport V2
They are on separate inputs (USB)
Within the configuration menu, I can calibrate each one and assign steering to the wheel and brake/gas to the pedals correctly. However, when I calibrate/assign the pedals, the steering goes away. So I go ahead and recalibrate the wheel and at that point I lose the pedals. Seems like I just can't have both working at the same time.
Another weird thing is that under calibration -> controller sometimes I see just 2, some other times they duplicate up to 5 times (10 devices in total)...however doesn't matter what I select, it always shows as either J2 (steering) or J1 (pedals)
Can you help me understand how to fix it? Is it just an issue with the demo or should I expect the same issues in the full version?
Can you post screen shots or phone pics of these problems?
Ok this is what's driving me insane...I really hope somebody can help me out with this
Step 1: I check that both pedals and wheel work gas, brake, steering side to side. Everything's OK
http://imgur.com/U3c7zIA
http://imgur.com/jjTlqxB
Step 2: lauch KartRacing Pro and go to settings. You can see pedals are setup and work (see the two bars to the bottom right green and red, I was pressing the pedals). Wheel is unassigned
http://imgur.com/KLhUZqY
Step 3: I calibrate the wheel. All ok, I can find it in the list and the bar moves.
http://imgur.com/zG0kSCt
Step 4: The wheel works (see the yellow bar) but pedals are now dead.
http://imgur.com/5coFZvK
Step 5: I calibrate the pedals...notice now I've got a new set of peripherals.
http://imgur.com/QxqdEZy
Step 6: Pedals now work fine, but wheel is dead.
http://imgur.com/aU7gwDV
Step 7: I calibrate the wheel and I notice another set of peripherals is added. Nevermind, I calibrate and assign, works but now pedals don't and the loop goes on and on
http://imgur.com/6WDqb01
Thank you for the detailed report.
This issue is under investigation.
good morning,
I have the same problem with my base fanatec csw v2 and
my pédalier fanatec separated in the software of demonstration,
I wait for an answer to this problem to buy this product,
warmly,
gt
Hi,
Was this issue ever resolved? I am having the same problem.
Logitech Driving Force GT
Fanatec CSR Elite Pedals
Quote from: slicing360 on July 14, 2017, 04:34:45 PM
Hi,
Was this issue ever resolved? I am having the same problem.
Logitech Driving Force GT
Fanatec CSR Elite Pedals
Please upload the file "calib.txt", that should be saved in "My Documents"/PiBoSo/Kart Racing Pro/profiles/"your profile name"/
I have uploaded it as an attachment here.
Quote from: slicing360 on July 15, 2017, 07:11:42 AM
I have uploaded it as an attachment here.
Thank you.
Why is the steering wheel not calibrated?
Are you using the latest version of Kart Racing Pro, release1?
I'm using the release from Steam. I'm assuming this is release 1.
I've calibrated the wheels and the pedals multiple times but it will only register one or the other at any given time it seems.
Ok.
Thank you.
i have the same problem with the same hardware.
yesterday works perfect with the release 1 downloaded.
today i've installed the steam version and the problem starts.
i've solved editing the calib.txt file in the Fanatec pedal section:
FANATEC USB Pedals
4
3
1023
0
1023
4
1023
0
1023
5
1023
0
1023
6
255
255
255
}
now all works fine!
Quote from: Pelice on July 22, 2017, 12:57:30 PM
i've solved editing the calib.txt file in the Fanatec pedal section:
FANATEC USB Pedals
4
3
1023
0
1023
4
1023
0
1023
5
1023
0
1023
6
255
255
255
}
now all works fine!
Thank you for the report.
i have v2 fanatec wheel v2 pedals and thrustmaster shifter and wheel kinda works really sensitive in calibration but pedals not working get pedals working then wheel wont then it only turns left and pedals wont work keep going into calibration but each trime i do it uncalibrates or unassigns the previous thing i just did think that this is the game will not support multiple usb ports yet please confirm or not really love my racing and its really frustrating this is only game my rig has issues with
cheers
Quote from: Vargs on July 23, 2017, 06:13:52 AM
i have v2 fanatec wheel v2 pedals and thrustmaster shifter and wheel kinda works really sensitive in calibration but pedals not working get pedals working then wheel wont then it only turns left and pedals wont work keep going into calibration but each trime i do it uncalibrates or unassigns the previous thing i just did think that this is the game will not support multiple usb ports yet please confirm or not really love my racing and its really frustrating this is only game my rig has issues with
cheers
Kart Racing Pro supports multiple controllers.
The wheel and pedals must be both calibrated at the same time.
Every time the "Calibration" button is pressed, the calibration is reset for all controllers.
Hi guys! I'm new here and I've found this forum because had the same problem with my Fanatec ClubSport Wheel Base V2 and ClubSport Pedals V3.
Here is my solution:
1.Settings --> Calibration
2.Chose what you want to calibrate (see attached picture)
3.Calibrate Wheel and Pedals
4.Click OK button
5.Assign controls in Settings menu
In my case after these steps problem was solved.
It was very hard to calibrate T500RS and Derek Speare Designs pedals. I managed at least after several attempts. Every time I try to calibrate pedals after wheel something strange happened to wheel. It went crazy or all controls disappeared. Then I calibrated pedals first and after that the wheel. DXTweak was done before this for pedals.
Could you please upload the file "calib.txt" that should be generated in "Documents"/PiBoSo/Kart Racing Pro/profiles/"your profile name"/ ?
Here is my calib.txt
3
{
FA9B2810-B44B-11E9-800F-444553540000
Thrustmaster T500 RS Racing wheel
4
0
33188
0
65535
1
1023
511
1023
5
1023
511
1023
6
1023
511
1023
}
{
F20009F0-B446-11E9-8007-444553540000
T500 RS Gear Shift
2
0
128
128
128
1
128
128
128
}
{
F2027AF0-B446-11E9-8009-444553540000
DSD Professional Grade Sim Racing Pedals
6
0
0
0
0
1
0
0
0
2
0
0
0
3
2519
2519
3689
4
2636
2635
3659
5
29
12
4054
}
Is it possible to encode manual h-shifter for kz1?
Quote from: Bloodycut on November 01, 2019, 07:20:02 PMIs it possible to encode manual h-shifter for kz1?
At the moment it's not possible, because the real gearbox is sequential.
Sequential is not suitable for me. Maybe modders invent h-shifter mod or not. Automatic works sometimes but I like to change right gear in right place.