Kart Racing Pro Official Forum

General => Support => Topic started by: aa82 on April 22, 2017, 03:05:46 am

Title: Config issue - Wheels and pedals don't work at the same time
Post by: aa82 on April 22, 2017, 03:05:46 am
Hi, I've just installed the demo and can't configure it to accept both wheel and pedals together.
Wheel: Thrusmaster T300RS
Pedals: Fanatec Clubsport V2
They are on separate inputs (USB)

Within the configuration menu, I can calibrate each one and assign steering to the wheel and brake/gas to the pedals correctly. However, when I calibrate/assign the pedals, the steering goes away. So I go ahead and recalibrate the wheel and at that point I lose the pedals. Seems like I just can't have both working at the same time.

Another weird thing is that under calibration -> controller sometimes I see just 2, some other times they duplicate up to 5 times (10 devices in total)...however doesn't matter what I select, it always shows as either J2 (steering) or J1 (pedals)

Can you help me understand how to fix it? Is it just an issue with the demo or should I expect the same issues in the full version?
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: 3rd.Rail on April 22, 2017, 04:43:57 am
Can you post screen shots or phone pics of these problems?
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: aa82 on April 23, 2017, 05:10:09 am
Ok this is what's driving me insane...I really hope somebody can help me out with this

Step 1: I check that both pedals and wheel work gas, brake, steering side to side. Everything's OK
http://imgur.com/U3c7zIA
http://imgur.com/jjTlqxB


Step 2: lauch KartRacing Pro and go to settings. You can see pedals are setup and work (see the two bars to the bottom right green and red, I was pressing the pedals). Wheel is unassigned
http://imgur.com/KLhUZqY


Step 3: I calibrate the wheel. All ok, I can find it in the list and the bar moves.
http://imgur.com/zG0kSCt


Step 4: The wheel works (see the yellow bar) but pedals are now dead.
http://imgur.com/5coFZvK


Step 5: I calibrate the pedals...notice now I've got a new set of peripherals.
http://imgur.com/QxqdEZy

Step 6: Pedals now work fine, but wheel is dead.
http://imgur.com/aU7gwDV

Step 7: I calibrate the wheel and I notice another set of peripherals is added. Nevermind, I calibrate and assign, works but now pedals don't and the loop goes on and on
http://imgur.com/6WDqb01
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: PiBoSo on April 23, 2017, 02:18:33 pm

Thank you for the detailed report.
This issue is under investigation.
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: genorimo on May 10, 2017, 11:59:30 am
good morning,
I have the same problem with my base fanatec csw v2 and
my p├ędalier fanatec separated in the software of demonstration,
I wait for an answer to this problem to buy this product,
warmly,
gt
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: slicing360 on July 14, 2017, 04:34:45 pm
Hi,

Was this issue ever resolved? I am having the same problem.

Logitech Driving Force GT
Fanatec CSR Elite Pedals
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: PiBoSo on July 14, 2017, 07:06:54 pm
Quote from: slicing360 on July 14, 2017, 04:34:45 pm
Hi,

Was this issue ever resolved? I am having the same problem.

Logitech Driving Force GT
Fanatec CSR Elite Pedals


Please upload the file "calib.txt", that should be saved in "My Documents"/PiBoSo/Kart Racing Pro/profiles/"your profile name"/
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: slicing360 on July 15, 2017, 07:11:42 am
I have uploaded it as an attachment here.
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: PiBoSo on July 15, 2017, 09:27:03 pm
Quote from: slicing360 on July 15, 2017, 07:11:42 am
I have uploaded it as an attachment here.


Thank you.
Why is the steering wheel not calibrated?
Are you using the latest version of Kart Racing Pro, release1?
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: slicing360 on July 15, 2017, 10:38:19 pm
I'm using the release from Steam. I'm assuming this is release 1.

I've calibrated the wheels and the pedals multiple times but it will only register one or the other at any given time it seems.
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: PiBoSo on July 15, 2017, 10:41:41 pm

Ok.
Thank you.
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: Pelice on July 20, 2017, 10:26:55 pm
i have the same problem with the same hardware.
yesterday works perfect with the release 1 downloaded.
today i've installed the steam version and the problem starts.

Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: Pelice on July 22, 2017, 12:57:30 pm
i've solved editing the calib.txt file in the Fanatec pedal section:

FANATEC USB Pedals
4
3
1023
0
1023
4
1023
0
1023
5
1023
0
1023
6
255
255
255
}


now all works fine!
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: PiBoSo on July 22, 2017, 10:03:56 pm
Quote from: Pelice on July 22, 2017, 12:57:30 pm
i've solved editing the calib.txt file in the Fanatec pedal section:

FANATEC USB Pedals
4
3
1023
0
1023
4
1023
0
1023
5
1023
0
1023
6
255
255
255
}


now all works fine!


Thank you for the report.
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: Vargs on July 23, 2017, 06:13:52 am
i have v2 fanatec wheel v2 pedals and thrustmaster shifter and wheel kinda works really sensitive in calibration but pedals not working get pedals working then wheel wont then it only turns left  and pedals wont work keep going into calibration but each trime i do it uncalibrates or unassigns the previous thing i just did think that this is the game will not support multiple usb ports yet please confirm or not really love my racing and its really frustrating this is only game my rig has issues with
cheers
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: PiBoSo on July 23, 2017, 11:03:21 am
Quote from: Vargs on July 23, 2017, 06:13:52 am
i have v2 fanatec wheel v2 pedals and thrustmaster shifter and wheel kinda works really sensitive in calibration but pedals not working get pedals working then wheel wont then it only turns left  and pedals wont work keep going into calibration but each trime i do it uncalibrates or unassigns the previous thing i just did think that this is the game will not support multiple usb ports yet please confirm or not really love my racing and its really frustrating this is only game my rig has issues with
cheers


Kart Racing Pro supports multiple controllers.
The wheel and pedals must be both calibrated at the same time.
Every time the "Calibration" button is pressed, the calibration is reset for all controllers.
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: 7Drive on May 14, 2018, 05:03:17 pm
Hi guys! I'm new here and I've found this forum because had the same problem with my Fanatec ClubSport Wheel Base V2 and ClubSport Pedals V3.

Here is my solution:
1.Settings --> Calibration
2.Chose what you want to calibrate (see attached picture)
3.Calibrate Wheel and Pedals
4.Click OK button
5.Assign controls in Settings menu

In my case after these steps problem was solved.
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: Bloodycut on August 19, 2019, 04:38:41 pm
It was very hard to calibrate T500RS and Derek Speare Designs pedals. I managed at least after several attempts. Every time I try to calibrate pedals after wheel something strange happened to wheel. It went crazy or all controls disappeared. Then I calibrated pedals first and after that the wheel. DXTweak was done before this for pedals.
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: PiBoSo on August 20, 2019, 11:32:23 am

Could you please upload the file "calib.txt" that should be generated in "Documents"/PiBoSo/Kart Racing Pro/profiles/"your profile name"/ ?
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: Bloodycut on August 27, 2019, 11:08:29 am
Here is my calib.txt

3
{
FA9B2810-B44B-11E9-800F-444553540000
Thrustmaster T500 RS Racing wheel
4
0
33188
0
65535
1
1023
511
1023
5
1023
511
1023
6
1023
511
1023
}
{
F20009F0-B446-11E9-8007-444553540000
T500 RS Gear Shift
2
0
128
128
128
1
128
128
128
}
{
F2027AF0-B446-11E9-8009-444553540000
DSD Professional Grade Sim Racing Pedals
6
0
0
0
0
1
0
0
0
2
0
0
0
3
2519
2519
3689
4
2636
2635
3659
5
29
12
4054
}
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: Bloodycut on November 01, 2019, 07:20:02 pm
Is it possible to encode manual h-shifter for kz1?
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: PiBoSo on November 02, 2019, 10:56:21 am
Quote from: Bloodycut on August 27, 2019, 11:08:29 amHere is my calib.txt

Thank you.
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: PiBoSo on November 02, 2019, 10:57:07 am
Quote from: Bloodycut on November 01, 2019, 07:20:02 pmIs it possible to encode manual h-shifter for kz1?

At the moment it's not possible, because the real gearbox is sequential.
Title: Re: Config issue - Wheels and pedals don't work at the same time
Post by: Bloodycut on November 02, 2019, 02:21:29 pm
Sequential is not suitable for me. Maybe modders invent h-shifter mod or not. Automatic works sometimes but I like to change right gear in right place.