Hi, someone who would like to share setups for the Mini?
or is it that the same setup works for every kart?
i use this one for every other kart changing the gears according to the track
Engine
Idle: 25
Carburetor: 3
Radiator Cover: 35%
Chassis
Rear axle: 50mm - soft
Front bar: flat
Front crash bar: tight
Mid bar: out
Side pod bars: loose
Rear bar: out
Rear crash bar: loose
Seat
Horizontal: 57.0 cm
Vertical: 2.0 cm
Stays: 2
Drivetrain
Front: 12
Rear: 77
Steer
Ratio: max
Ackermann: max
Front
Caster: 16
Camber: -7
Pressure: 0.70 bar
Ride height: 2.5 cm
Toe out: 7
Track width: 1225 mm
Rear
Pressure: 0.65 bar
Ride height: 3.0 cm
Track width: 1390 mm
lol i use almost the same with more pressure in tyre 95/100 try it ;)
But it's just a quick set up so it's useless to share mine when it 'll be better i 'll do...
maybe you guys could help piboso to "correct" the physics in order to get a real setup work within the sim.
if more than one real karting drivers agree that in order to achieve fast times you have to setup the kart in the game in a way that you would never do in real life, there's something not working as it should.