Download page: http://forum.kartracing-pro.com/index.php?topic=1636.msg12843#msg12843
IAME
(http://i59.tinypic.com/w8mb0h.jpg)
SOCOREM
(http://i48.tinypic.com/35b8px5.jpg)
Free Line (dry and rain)
(http://i48.tinypic.com/1zq4hhf.jpg)
(http://i46.tinypic.com/2qcqiwk.jpg)
KG APE
(http://i46.tinypic.com/307m3ac.jpg)
FS250 WIP
nice work :)
awesome stuff :) great to see this so early.
Nice work very nice ;)
once hand choke is fine tuned a pack wiil be released
(http://i45.tinypic.com/k2z0w2.jpg)
Socorem Released
http://dl.dropbox.com/u/59339424/SOCOREM.zip
he put his finger inside that hole xD
use a specular map for it!
Evo wear i put the Link?
Just in the KRP or ?
In your '..\Kart Racing Pro' folder create these additional folders '..\intakes\SOCOREM' and put all files there.
if you just extract in the KRP folder it should work
Ok thank you!
links links links :D
Quote from: EVO on October 07, 2012, 08:41:38 PM
Socorem Released
http://dl.dropbox.com/u/59339424/SOCOREM.zip
Woah. Can't wait to do some more laps with all the addons. It's a shame my holidays just ended shortly before the release of b7 :-\
The NOX rotated not finished?
Hey all looks like i wil have to make the freeline and discard the NOX
http://www.kartsportnews.com/content/2012/news_120203-7.html
does anylne have it and can take pictures? I can not find enough.
Quote from: EVO on October 10, 2012, 07:00:34 AM
Hey all looks like i wil have to make the freeline and discard the NOX
http://www.kartsportnews.com/content/2012/news_120203-7.html
does anylne have it and can take pictures? I can not find enough.
EDIT 2: after this one can u possibly make a 2-hole airbox? its the one we use in Australia, like one of the only ones :P
oh and also i have one of them so i can do as many pics as u want(well...i will try)
Edit: heres's some pics of both types EVO ;) (http://i50.tinypic.com/2nu7mg0.jpg)
(http://i48.tinypic.com/34o3r54.jpg)
(http://i50.tinypic.com/17bd4j.jpg)
(http://i46.tinypic.com/fwqhkx.jpg)
(http://i47.tinypic.com/1zl5h1x.jpg)
sorry this is all i got. ;(
Is it possible to smoothen the airboxes they look a little low poly don't they?
i think too but evo already did a great job!
i have all those pictures already
Evo should it posible that i give pictures of this Airbox
(http://www.kartsfrancis.com/tienda/images/filtro%20aire%20x30,puma%2085.jpg)
yeah want that,too. i try to make it because i have it on my kart so i can take pictures.
i really had no idea that were so many different types of airboxes like that! wow!!!!!!
yeah thats a pretty common one. they also have them vertical with two and three holes.
All this variety of airboxes are not allowed here in Brazil 😓
Jajaja Dan pero tiene mejores motores allá ;)
por supuesto que sí! jejejeje
en verdad, no son tan buenos hoy en día, porque tienen muchas limitacciones verdad! :(
i have a track record from 2002 with a V4 (old 2 stroke engine) that they can't beat it nowadays, with PCRs or Parillas!!!! :(
eso es muy triste! :(
Dan, alla no se usan los iame sudam my 10? Con limite a 16500rpm?
Please keep it English
haha Laraarsa ;D
the 125cc Sudam water cooled direct drive will goto 18,000 rpm and make 40+ hp on alcohol.
you're right lara...
we are talking about the engines here and there!
i said that here in Brazil engines used to be much powerful and faster than nowadays...
the engines have rev limiters and stuff...
as i said, i used to race with the old V4 and yellow (some times green) MG tyres, that left lots of rubber on the track surface! two carburators, and air refrigerated engines... with these setups, i got the brazilian record for this track Aldeia da Serra (here in Sao Paulo - Brazil) in 2002, and they never took that lap record from me, because of the limitations of the categories! :(
with the V4 and a minimum weight of 140kg (kart+driver+suit+helmet-fuel), we used to reach 140 to 145km/h of top speed... the Parillas, 150!!!!!!! that was INSANE!!!!!!!! i miss those days...
Quote from: Dan Buck on October 11, 2012, 06:33:01 PM
you're right lara...
we are talking about the engines here and there!
i said that here in Brazil engines used to be much powerful and faster than nowadays...
the engines have rev limiters and stuff...
as i said, i used to race with the old V4 and yellow (some times green) MG tyres, that left lots of rubber on the track surface! two carburators, and air refrigerated engines... with these setups, i got the brazilian record for this track Aldeia da Serra (here in Sao Paulo - Brazil) in 2002, and they never took that lap record from me, because of the limitations of the categories! :(
with the V4 and a minimum weight of 140kg (kart+driver+suit+helmet-fuel), we used to reach 140 to 145km/h of top speed... the Parillas, 150!!!!!!! that was INSANE!!!!!!!! i miss those days...
Monster Engines!!
indeed they were!!!!
any more new air boxes evo?!
waiting on pics of the FreeLine and SA250 airboxes (front, sides, top) there are not enough good internet pictures. If anyone has them give them to me please
Hey Evo if someone did'nt have one of those airboxes what would it show up as? u know like how if someone does'nt have the same paint downloaded the other player has it comes up as the Base colour? ???
Yeah,i think if im with SOCOREM and you dont have installed it you will se me with the Cobra or the NOX ^^
For those intersted in making their own airboxes using 3ds max here is a archieve including my max scene for the Socorem
the box is placed perfectly so dont move it. Name your aribox in 3ds max the name above the POS values in gfx.cfg
Adjust the POS values in the intake folder gfx.cfg which will orient the drivers hand to the airbox holes.
export to the intake folder and test
http://dl.dropbox.com/u/59339424/Soco.zip
thank you very much ;)
im going to do a airbox with a gopro on it ;)
Quote from: LauZzZn on November 10, 2012, 09:34:45 AM
thank you very much ;)
im going to do a airbox with a gopro on it ;)
cool :D
Progress
(http://i48.tinypic.com/2mfzw37.jpg)
I like this :)
(http://i49.tinypic.com/beal1u.jpg)
too many polys?
no i think its very good.
Quote from: LauZzZn on November 13, 2012, 07:19:57 AM
no i think its very good.
same here, its very good. ;D
It looks great! There is a configuration for a normal day?
(http://i45.tinypic.com/2e38nrm.jpg)
also check the first post. Free Line is complete
download for free line?
and evo what program do u use i saw its not 3dsmax
comand line based 3d modeling Rhino 4&5. its super efficient but doesnt makes meshes that well. but you can optimize them in 3ds max so its works well
some news?
at the moment do the shape of the airbox's effect airflow or is are these airboxes just cosmetic?
just cosmetic no performance advangtage or disadvantage
any news on the airboxes?
New airbox added to my downloads. See the first thread.
Sure looks good, EVO, did you model it yourself or was it the one from the Parilla? Also, when (if ever) do you plan on giving out the red two and three hole airboxes? Bringing me back to the cadet days with the Comer 80's ;D
Modeled from scratch. I sent the airbox to M.McLean because he is doing the KT100 and that is the only engine currently it is suitable for.