This tutorial is for the corridors. They are very important for the rolling start because if you don't adjust them fine, you can't do the rolling start like it has to be.
They are very easy to do:
Open track editor, open your track and then open race data:
(http://img194.imageshack.us/img194/7404/corridors1.jpg)
As you can see, only one corridor is shown as default and centered in the centerline (my track has wrong centerline, it is the fast line but it doesn't matter at this point)
Corridors are both 0, you have to adjust them using ALWAYS + and - depending on what side of the corridor are you adjusting (- for the left in this track)
(http://img26.imageshack.us/img26/7531/corridors2.jpg)
You have to try different values:
(http://img96.imageshack.us/img96/2594/corridors3.jpg)
(http://img832.imageshack.us/img832/3936/corridors4.jpg)
Yes, I have positive value for the left corridor but again, my centerline is wrong, is on the left side so the corridor also has strange values. If you do the centerline in the center, you will have minus and plus values on left and right :)
they dont show on the track :( i guess i have done everything right... positioning and saving...
ive tried in a track i made from scratch and one ive converted... the corridors arent showing in any of them :-\
have you done with tracked like i showed you?
when i am back i can show you how it works very detailed.
Quote from: LauZzZn on December 22, 2012, 07:46:43 AM
have you done with tracked like i showed you?
when i am back i can show you how it works very detailed.
i guess so... the grid is showing normally on both tracks... im having trouble with corridors :S
just set these number under the grid it should work.