Follow this guide http://forum.kartracing-pro.com/index.php?topic=1832.0 (http://forum.kartracing-pro.com/index.php?topic=1832.0) i did a test track, but when i try to start the track
i get the error "pitlane full". What's wrong?
Sorry for the translation, i'm Italian
work on the racedata files
this is the test track....
I did not understand what I do in race data, I have only done centerline
thats the problem :D just do the racedata and save it
This is the file that generated, but it is always the same error... how should I add the references?
finish_line
{
long = 1220.053467
left = 1.000000
right = 2.000000
}
speedtrap_line
{
long = 0.000000
left = 0.000000
right = 0.000000
}
split1
{
long = 408.017822
left = -10.000000
right = 10.000000
}
split2
{
long = 816.035645
left = -10.000000
right = 10.000000
}
pit_lane
{
numstalls = 1
starttype = 1
startstartlong = 0.000000
startdifflong = 0.000000
startstartlat = 0.000000
startendlat = 0.000000
startanglerel = 0.000000
startposx = 55.000000
startposz = -124.000000
startspacingx = 8.000000
startspacingz = 8.000000
startangleabs = 0.000000
startcolumns = 0
start_stall0
{
long = 0.000000
lat = 0.000000
angle = 36.127693
}
}
starting_grid
{
numstalls = 6
numstallsperrow = 2
distfromstartline = 1.000000
lanespacing = 1.000000
rowspacing = 4.000000
difflat = 0.000000
lanewidth = 3.000000
latshift = 0.000000
side = 0
stall0
{
long = 1219.053467
lat = -1.500000
angle = 0.000000
}
stall1
{
long = 1218.053467
lat = 1.500000
angle = 0.000000
}
stall2
{
long = 1215.053467
lat = -1.500000
angle = 0.000000
}
stall3
{
long = 1214.053467
lat = 1.500000
angle = 0.000000
}
stall4
{
long = 1211.053467
lat = -1.500000
angle = 0.000000
}
stall5
{
long = 1210.053467
lat = 1.500000
angle = 0.000000
}
}
corridor0 = 0.000000
corridor1 = 0.000000
num_checkpoints = 0
speedtrap line is the place where you want the speed measured.
also you have to set the pits and the grid
if I put the values in speedtrap line i see the lines that move, but in absolute nothing happens, i also set the grid
saved and copied the files pista.map, pista.trp and pista.rdf folder inside tracks.pkz but does not work maybe because I've got another lane
Generate grid by using the kart button and set more than one pit
I set 4 in num pits but in absolute nothing ever happens, i always say pitlane full
I finally managed to turn the kart on the track, but I did not mark the lap time even though I set it all in, and if I leave the track I end up in a vacuum, even if there is grass
Did you assign the gras the TRKGRAS prefix? If not, that's why.
I did it this way TRKGRAS_object01, TRKGRAS_object02 ecc. And because I do not mark the lap time? Where am i wrong?
For start/finish, is the "left" marked with a negative or positive number. Left is always negative, right is positive, and you have to add in splits and checkpoings with the same rule.
So i did well? (see picture above)
You did not select Kart Racing Pro in that selection menu. You were on GP Bikes
although with the exception KRP when I open my track editor are always placed on GP Bikes....
I do not the works the lap time...
the track i made with bobs track, i have to set them with bobs track the line start?
I attach my file .rdf