Steps to reproduce:
- Open settings.
- Open device selection menu (first device is Nostromo, second one is G27) and select G27.
- Set all settings as needed and press Done.
- Exit from sim.
- Start sim.
- Open settings.
- Steering settings on first page is blank, settings on other pages is ok.
- G27 is not selected as device for configuration.
- Selecting G27 again doesn't solves the problem, steering setting must be applied from scratch.
Sim version: beta9.
OS: Windows 7 x86_64.
Unplugging Nostromo and removing it drivers doesn't solves the problem.
Maybe G27 device GUID saved in calib.txt and controls.txt doesn't match real device id?
I've attached dxdiag output and profile settings to this post.
Steering settings can not be set until G27 device selected in Calibration menu.
I have the same problem. :(
I realize this is an old post so forgive me if I should have started a new one. I have a related issue so I thought someone here could provide some insight.
I am running the Fanatec Forza Motorsport wheel and CSR Pedals on my son's SIM. I just got it up and running today. I have properly set up the wheel and pedals so that they work, however, as stated in this post each time we exit KRP and enter all other settings are saved EXCEPT the steering and pedals.
I made sure to select the correct profile but still the steering and pedal setting need to be reprogrammed.
I am new here and to KRP. Any help would be greatly appreciated!
Thanks in advance!