Hi.. Just getting used to things - when I brake for corners , the kart always stalls! Any ideas how I fix it?
Also has anyone got a good bench line set up for KF3??
Many thanks
dont lock up the brakes!
turn your brake pressure down maybe to about 60ish :)
I suppose you are speaking of karts with automatic clutch, there are 2 way
- increase idle
- when braking give a little bit gas
mate in a tony kart 2 seat stays 50 medium axle 15mm of caster -2 of camber
go to 1210 on front width and 1390 on rear and for u problem u have put the
idle up to 10
This is the set I used to do a 43.4 at Lonato in the Tony Kart:
(http://img521.imageshack.us/img521/2126/kartexe2013033000430739.png)
(http://img441.imageshack.us/img441/4051/kartexe2013033000431099.png)
(http://img442.imageshack.us/img442/6245/kartexe2013033000431399.png)
(http://img404.imageshack.us/img404/4079/kartexe2013033000431706.png)
Now a very happy user - braking working fine and set up advice spot on. Certainly using a steering wheel transforms the game
go standard and just go to 15mm of caster and +2 of camber medium axel .65bar 2 seat stays soft tires 10 idle 2 carburettor 4l of fuel and that's how I did a 42.4 was like 3 tenths off the world record :(
ohh and cant remember gear ratio and that was at lonato the 42.4
If your are forced to use a gamepad adjusting pressure in the garage will stop locking
less brake pressure in the setup menu, helped me and is actually making it easier to drive, just don't do it too far or you won't stop fast enough lol