Kart stalling on braking

[jnwrf01]

Hi.. Just getting used to things - when I brake for corners , the kart always stalls! Any ideas how I fix it?

Also has anyone got a good bench line set up for KF3??

Many thanks

[BenMagz]

dont lock up the brakes!

[Piers Prior]

turn your brake pressure down maybe to about 60ish

[oppolo]

I suppose you are speaking of karts with automatic clutch, there are 2 way
- increase idle
- when braking give a little bit gas

[Sam]

mate in a tony kart 2 seat stays 50 medium axle 15mm of caster -2 of camber
go to 1210 on front width and 1390 on rear and for u problem u have put the
idle up to 10

[Nathan Dunnett]

This is the set I used to do a 43.4 at Lonato in the Tony Kart:

[jnwrf01]

Now a very happy user - braking working fine and set up advice spot on. Certainly using a steering wheel transforms the game

[Sam]

go standard and just go to 15mm of caster and +2 of camber medium axel .65bar 2 seat stays soft tires 10 idle 2 carburettor 4l of fuel  and that's how I did a 42.4 was like 3 tenths off the world record

[Sam]

ohh and cant remember gear ratio and that was at lonato the 42.4

[EVO]

If your are forced to use a gamepad adjusting pressure in the garage will stop locking

[KZ2_Iceman97]

less brake pressure in the setup menu, helped me and is actually making it easier to drive, just don't do it too far or you won't stop fast enough lol