Engines / karts

[EVO]

if we want to make sounds how long is each sample?  are they straight forward like their names?  kart_idle.wav  ,  kart_offhigh.wav kart_onhigh.wav

Arrowjmax4 can you record the sound next dyno runs you see and run the engine under high and low load (rev up and down fast as well as slow).  What pipe do you use on your engines in the dyno?

Samples must be recorded at a fixed RPM, and saved as mono. They must be loopable.

PiBoSo i tried this today and the catergory would only load with your files and not the ones i created.  They are all 16bit wave mono files do they need your special encryption to work?

All WAV files should work.
Could you please upload the files?

https://dl.dropboxusercontent.com/u/59339424/KT100sound.zip

[PiBoSo]

The engine.scl file is needed, too.

[EVO]

Can you write  a brief turorial on that. I just tried to use the f100 file

[PiBoSo]

Can you write  a brief turorial on that. I just tried to use the f100 file

The samples have been tested and they are correctly loaded.
Please make sure to copy sfx.cfg and engine.scl from an existing engine.

[EVO]

any tips on sound capturing and looping?  the off sounds are proving difficult to reproduce

[gerakart24]

piboso hello! above all wanted to congratulate you on the game is great!! a question. I can lower the KZ engine power?, just power down without changing anything but nothing more, as I do?

[Top-Kart 92]

Can I have a mini60 boy in the KF3 piboso?

[Sam]

Even without creating new engines, it is easy to create a new kart.

For example, someone asked for a FS250 kart with combined brakes.
- Create the folder "karts" in Kart Racing Pro installation directory.
- Open the file karts.pkz ( it's a renamed ZIP file ), and unpack "c_fs250" in the new folder.
- Rename the folder to something else like "c_fs250b".
- Rename c_fs250.cfg and c_fs250.ini to c_fs250b.cfg and c_fs250b.ini
- Edit c_fs250b.cfg ( it's a text file ) and change c_fs250 to c_fs250b and all "c_kf-b" to "c_kz".
- Edit gfx.cfg and change "c_kf-b" to "c_kz".
- Edit c_fs250b.ini and change all "C FS250" to "C FS250b".
- Enjoy

It's not a perfect solution, as you get an unused shift lever, but it's just an example to understand how the files work.

when i try do this at the start when i try open the kart pkz it says pic something to open it with, i go on to pic notepad and then heeps of writing comes up.  how do i get the acctual karts

[Sam]

dw i got it to work but i cant get the shifter motor on the 60 mini kart. is it not possible to do this?? if it is possible can u please send me the folder with a shifter on a 60mini , thankyou in advance

[EVO]

download 7zip. and open pkz with 7zip file manager

[Top-Kart 92]

okay thx

[Sam]

Evo I got the folder to open but I can't get the shifter motor on the mini kart

[Top-Kart 92]

I cant find the ini file so plz help me evo

[Sam Flintham]

Evo I got the folder to open but I can't get the shifter motor on the mini kart

Hahahahaha this **** aye! Shifter motor on the mini sounds cool

< mod edit: please don't swear on the forum >

[Cory_Hayes]

Evo I got the folder to open but I can't get the shifter motor on the mini kart

Hahahahaha this cunt aye! Shifter motor on the mini sounds cool

I don't think you can swear like that on the forum..