Kart Racing Pro Official Forum

General => General Discussion => Topic started by: signup9 on August 22, 2015, 11:16:20 AM

Title: Rolling in corners?!
Post by: signup9 on August 22, 2015, 11:16:20 AM
Hi all, Any time I go for a quick lap, I always manage to flip the kart mid corner? I have no clue whats happening? Any one else having the same problem?
Thanks :)
Title: Re: Rolling in corners?!
Post by: Cory_Hayes on August 22, 2015, 12:13:02 PM
Basically, your setup has "too much" like mid corner grip.....  I suggest you just learn to drive around the problem, like.... just be a bit more careful, because those kind of setups are normally really good setups, but you just have to learn to drive around it......
Title: Re: Rolling in corners?!
Post by: McBidouille on August 22, 2015, 12:46:00 PM
Hey,

Cory is right. However, if your kart make flip mid corner, this is probably because U have too much grip.
Maybe work on the differential setting can reduce the flip effect. By the way U can widen front and rear tracks.
There is many ways to resolve your problem.
Title: Re: Rolling in corners?!
Post by: Cory_Hayes on August 22, 2015, 12:53:52 PM
Quote from: McBidouille on August 22, 2015, 12:46:00 PM
Hey,

Cory is right. However, if your kart make flip mid corner, this is probably because U have too much grip.
Maybe work on the differential setting can reduce the flip effect. By the way U can widen front and rear tracks.
There is many ways to resolve your problem.

McBidouille is right, I should have actually pointed that out, obviously if you want it to go away in general, lower your seat, change some track widths, I would put my rear wheels out a bit.
Title: Re: Rolling in corners?!
Post by: signup9 on August 22, 2015, 01:26:50 PM
Okay thanks so much for all your help guys, i really appreciate it! ;D I will have a play around with my track widths and see what happens! :)
Title: Re: Rolling in corners?!
Post by: LIAM-36-AUS on August 30, 2015, 12:18:47 AM
Cory and McBidouille are correct, Seems to be the Front Nosecone digging into the track when the kart Jacks too much.
Title: Re: Rolling in corners?!
Post by: LIAM-36-AUS on August 31, 2015, 05:32:58 AM
Quote from: DRkarter97 on August 30, 2015, 11:53:42 PM
Quote from: LIAM-36-AUS on August 30, 2015, 12:18:47 AM
Cory and McBidouille are correct, Seems to be the Front Nosecone digging into the track when the kart Jacks too much.

That was fixed this beta, only with lowest front ride height do you get front end scraping and it has never induced a roll over mid corner.
Oh, Ok, I only recently updated to the latest Beta Sorry.