hi firstly there are only 1 options currently Metric or English if i choose
english = Mph and Degrees F
Metric = Kph and Degrees C
so what i need is 2 septrate options for speed and temp as i like to work in MPH and Degrees C and there is no way currently to configure this in the settings.
yeh i would like that as i prefer mph but dont understand degrees F as i only use degrees C :-[
lol
you should let behind imperial and use metric!
How much is the half of 5' and 3" ? It is insane!! :D
what im saying is if you choose english your tied with the MPH and Degrees F
i want MPH and DEGREES C
i dont see a way of setting this in the settings so i propose ditch METRIC / ENGLISH and go with 2 new options
SPEED = MPH / KPH
TEMP = Degrees C / Degrees F
this would give more choice
Quote from: Fazza on April 30, 2012, 05:31:01 PM
what im saying is if you choose english your tied with the MPH and Degrees F
i want MPH and DEGREES C
i dont see a way of setting this in the settings so i propose ditch METRIC / ENGLISH and go with 2 new options
SPEED = MPH / KPH
TEMP = Degrees C / Degrees F
this would give more choice
Which units would you prefer for each kart setup setting?
degrees C for all temprertature, and mph for speed for all karts
What about tires pressure, fuel, track width, toe, and the other kart units?
Quote from: PiBoSo on April 30, 2012, 05:41:06 PM
Quote from: Fazza on April 30, 2012, 05:31:01 PM
what im saying is if you choose english your tied with the MPH and Degrees F
i want MPH and DEGREES C
i dont see a way of setting this in the settings so i propose ditch METRIC / ENGLISH and go with 2 new options
SPEED = MPH / KPH
TEMP = Degrees C / Degrees F
this would give more choice
Which units would you prefer for each kart setup setting?
for kart setup, metric and imprerial still please. I know alot of people use metric. I do too, but some poeple still don't
Quote from: PiBoSo on April 30, 2012, 06:48:52 PMWhat about tires pressure, fuel, track width, toe, and the other kart units?
well if there are choices to be made its better for the user to be able to configure how they want it so give them all the options to tick rather than put them under metric ect.
At the moment there are two options:
Metric: km/h - C - cm / mm - kg - liter - bar
Imperial: mph - F - inch - pound - gallon - psi
So, the idea is to add a third system of units, that could be:
mph - C - cm / mm - kg - liter - psi
Ideas?
That sounds great! could it also be fully customizable in profile.ini for advance users?
thats what i would want thanks :)
Quote from: EVO on May 05, 2012, 06:14:28 AM
That sounds great! could it also be fully customizable in profile.ini for advance users?
It would be better to keep it simple unless it's strictly needed.
i would like to use MPH and Ferhinheit. the rest metric.
what if dash usnits were customizable seperate of setup units?
well i think better give the ppl thier choice of each
SPEED = (MPH) or (KPH)
TEMP = (Degrees C) or (Degrees F)
Measurement = (cm) or (Inches)
Weight = (Pound) or (Kg)
Fuel = (Liters) or (Gallons)
Pressure = (Bar) or (psi)
just have a radio button for each option so ppl get exactly what they want
MY PREF from thess options would be
MPH DegreesC cm Kg Liters PSI - im sure other ppl would come up with thier own perfered combinations but i see this as the only good way of sorting it.
speed = (mph), temp = ( degress c), measurements (cm), weight ( kg), fuel( litres), pressure = (psi), Good for me.
hey make this
kph - degress c
mph - degress c
kph - degress f
mph - degress f
Quote from: Fazza on May 07, 2012, 02:16:12 PM
well i think better give the ppl thier choice of each
SPEED = (MPH) or (KPH)
TEMP = (Degrees C) or (Degrees F)
Measurement = (cm) or (Inches)
Weight = (Pound) or (Kg)
Fuel = (Liters) or (Gallons)
Pressure = (Bar) or (psi)
+1
Quote from: The Iceman Marco on May 08, 2012, 02:55:52 PM
Quote from: Fazza on May 07, 2012, 02:16:12 PM
well i think better give the ppl thier choice of each
SPEED = (MPH) or (KPH)
TEMP = (Degrees C) or (Degrees F)
Measurement = (cm) or (Inches)
Weight = (Pound) or (Kg)
Fuel = (Liters) or (Gallons)
Pressure = (Bar) or (psi)
+1
+1
+1 I use metric measurements, but at the track in real life I like to use Pounds Per Square Inch (psi)